[2025] PDII by Salesforce Developers Actual Free Exam Practice Test
Free Salesforce Developers PDII Exam Question
The PDII exam is divided into two parts: a multiple-choice exam and a programming assignment. The multiple-choice exam consists of 60 questions and lasts for two and a half hours. The programming assignment involves the development of a custom application using Salesforce technologies and must be completed within a specified time-frame.
NEW QUESTION # 38
A developer is asked to replace the standard Case creation screen with a custom screen that takes users through a wizard before creating the Case. The org only has users running Lightning Experience.
What should the developer override the Case New Action with to satisfy the requirements?
- A. Lightning Record Page
- B. Lightning Flow
- C. Lightning Component
- D. Lightning Page
Answer: B
Explanation:
Overriding the standard Case New Action with a Lightning Flow allows the developer to create a custom wizard-style interface for creating cases. Lightning Flows can be embedded in Lightning Experience and provide a guided visual experience.
References:
Lightning Flow
NEW QUESTION # 39
global with sharing class MyRemoter {
public String accountName { get; set; }
public static Account account { get; set; }
public AccountRemoter() {}
@RemoteAction
global static Account getAccount(String accountName) {
account = [SELECT Id, Name, NumberOfEmployees
FROM Account WHERE Name = :accountName];
return account;
}
}
Consider the Apex class above that defines a RemoteAction used on a Visualforce search page.
Which code snippet will assert that the remote action returned the correct Account?
Account a = controller.getAccount('TestAccount');
- A. System.assertEquals( 'TestAccount', a.Name );
- B. Account a = remote.getAccount('TestAccount');
System.assertEquals( 'TestAccount', a.Name );
MyRemoter remote = new MyRemoter('TestAccount'); - C. System.assertEquals( 'TestAccount', a.Name );
MyRemoter remote = new MyRemoter(); - D. Account a = remote.getAccount ();
System.assertEquals( 'TestAccount', a.Name );
Account a = MyRemoter.getAccount('TestAccount');
Answer: A
NEW QUESTION # 40
What is the optimal way to fix this?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
Option C is the optimal way to fix the code. Option C uses the Test.startTest() and Test.stopTest() methods to enclose the callout and the assertion. These methods mark the start and the end of the test code and ensure that all asynchronous processes are completed before the test method finishes. This way, the developer can verify that the callout response is processed and the Account record is updated as expected . Reference: [Testing Asynchronous Apex], [Test.startTest()]
NEW QUESTION # 41
A large company uses Salesforce across several departments. Each department has its own Salesforce Administrator. It was agreed that each Administrator would have their own sandbox in which to test changes. Recently, users notice that fields that were recently added for one department suddenly disappear without warning. Also, Workflows that once sent emails and created tasks no longer do so. Which two statements are true regarding these issues and resolution? Choose 2 answers
- A. A sandbox should be created to use as a unified testing environment instead of deploying Change Sets directly to production.
- B. The administrators are deploying their own Change Sets over each other, thus replacing entire Page Layouts and Workflows in Production
- C. The administrators are deploying their own Change Sets, thus deleting each other's fields from the objects in production.
- D. Page Layouts should never be deployed via Change Sets, as this causes Workflows and Field-level Security to be reset and fields to disappear.
Answer: B,D
NEW QUESTION # 42
A developer is asked to build a solution that will automatically send an email to the customer when an Opportunity stage changes. The solution must scale to allow for 10,000 emails per day. The criteria to send the email should be evaluated after certain conditions are met.
What is the optimal way to accomplish this?
- A. Use a Workflow Email Alert.
- B. Use an Email Alert with Flow Builder.
- C. Use SingleEmailMessage() with an Apex trigger.
- D. Use MassEmailMEssage () With an Apex trigger.
Answer: B
Explanation:
Using an Email Alert with Flow Builder allows for scalable solutions that can handle large volumes of emails, and it offloads the processing from Apex to Salesforce's declarative automation tools. This approach is also bulk-safe, as it does not rely on Apex code that could hit governor limits.References: Flow Builder - Email Alerts
NEW QUESTION # 43
What is a consideration when testing batch Apex? (Choose two.)
- A. Test methods must call the batch execute() method once
- B. Test methods must use the @isTest (SeeAIIData=true) annotation
- C. Test methods must run the batch between TeststartTestQ and Test.stopTestQ
- D. Test methods must execute the batch with a scope size of less than 200 records
Answer: C,D
NEW QUESTION # 44
Consider the following code snippet:
How should <c-order> component communicate to the <c-order-order> component that an order has been selected by the user?
- A. Create and fire a standard DOM event.
- B. Create and dispatch a custom event
- C. Create and fire a component event.
- D. Created and fire an application event.
Answer: A
NEW QUESTION # 45
Account object has a field, Audit_Code__, that is used to specify what type of auditing the Account needs and a Lookup to user, Auditor__ that is the assigned auditor.
When an Account is initially created, the user specifies the Audit_Code__. Each User in the org has a unique text field, that is used to automatically assign the correct user to the Account Auditor__ field.
What should be changed to most optimize the code's efficiency?
Choose 2 answers
- A. Add an initial SOQL query to get all distinct audit codes.
- B. Add a WHERE clause to the SOQL query to filter On audit codes.
- C. Build a Map <Id, List<String>> of Account Id to audit codes.
- D. Build a Map<String, List<Account>> of audit code to accounts.
Answer: B,D
NEW QUESTION # 46
Which of the following exceptions cannot be caught and will force an error? (Choose three.)
- A. AssertException
- B. SObjectExceptions
- C. ListException
- D. License exceptions
- E. LimitException
- F. DMLException
Answer: A,D,E
Explanation:
SObjectException occurs when accessing a field not queried, or you try to change a field during the wrong dml statement (i.e. an edit-only field being set on insert) Custom exceptions must extend the "Exception" class
NEW QUESTION # 47
A developer wrote a trigger on Opportunity that will update a custom Last Sold Date field on the Opportunity's Account whenever an Opportunity is closed. In the test class for the trigger, the assertion to validate the Last Sold Date field fails.
What might be causing the failed assertion?
- A. The test class has not defined an Account owner when inserting the test data.
- B. The test class has not implemented seealldata=true in the test method.
- C. The test class is not using System. runs () to run tests as a Salesforce administrator.
- D. The test class has not re-queried the Account record after updating the Opportunity.
Answer: D
Explanation:
The test class may not be re-querying the Account record after updating the Opportunity, which is necessary to verify the updated field values. If the test does not query the database to get the most recent data after the trigger runs, it will not see the changes made by the trigger.
References: Apex Developer Guide - Testing Best Practices
NEW QUESTION # 48
Which three Visualforce components can be used to initiate Ajax behavior to perform partial page updates? Choose 3 answers
- A. A single visualforce Page leveraging Platform Events
- B. Two Lightning Components leveraging Application Events
- C. Two Visualforce Page Components leveraging Application Events
- D. Two Lightning Components leveraging Platform Events
Answer: A,C
NEW QUESTION # 49
An Apex trigger and Apex class increment a counter, Edit_Count_c, any time that the Case is changed.
A new process on the case object was just created in production for when a Case is created or updated< since the process was created, they are reports that the Count is being incremented by more than one on Case edit.
Which change in the Apex code will fix the problem?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 50
A developer is working on an integration between Salestorce and an external system. The integration requires sending a large amount of data to the external systern, which can cause long response times and timeouts.
To optimize the performance and avoid timeouts, which technique should be used?
- A. Increase the timeout limit in the callout options,
- B. Use the @future annotation to make the callout asynchronous.
- C. Implement an asynchronous callout using the Continuation class,
- D. Use a chained batch Apex to split the data into smaller batches.
Answer: C
Explanation:
Implementing an asynchronous callout using the Continuation class is the optimal solution to handle long response times and avoid timeouts in Salesforce. It allows the Apex code to make a long-running request to an external service and free up the thread to serve other requests.
References: Apex Developer Guide - Asynchronous Callouts
NEW QUESTION # 51
Which statement is true about using ConnectApi namespace (also called Chatter in Apex)? (Choose two.)
- A. Chatter in Apex operations are synchronous, and they occur immediately
- B. Many test methods related to Chatter in Apex require the IsTest (SeeAllData=true) annotation
- C. Chatter in Apex methods honor the 'with sharing' and 'without sharing' keywords
- D. Chatter in Apex methods do not run in system mode; they run in the context of the current user
Answer: B,D
NEW QUESTION # 52
A developer wrote an Apex method that makes an HTTP callout to an external system to get specialized data when a button is clicked from a custom Lightning web component on the Account record page.
Recently, users have complained that it takes longer than desired for the data to appear on the page after clicking the button.
What should the developer use to troubleshoot this issue?
- A. Event Logs
- B. Lightning Inspector
- C. Salesforce CU
- D. Developer Console
Answer: B
NEW QUESTION # 53
The Account object has a field, Audit_Code_c, that is used to specify what type of auditing the Account needs and a Lookup to User, zudizar_c, that is the assigned auditor. When an Account is initially created, the user specifies the Audit_Code c. Each User in the org has a unique text field, Audit_Code _e, that is used to automatically assign the correct user to the Account's Auditor_c field.
What should be changed to most optimize the code's efficiency?
Choose 2 answers
- A. Build a Map<Id, List<string>>of Account Id to audit codes.
- B. Add an initial SOQL query to get all distinct audit codes.
- C. Add a WHERE clause to the SOQL query to filter on audit codes.
- D. Build a Map<string, List<Account>> of audit code to accounts.
Answer: A,C
Explanation:
The change that should be made to most optimize the code's efficiency is to add a WHERE clause to the SOQL query to filter on audit codes. The WHERE clause is used to specify the conditions for selecting the records that match the query criteria, and to reduce the number of records that are returned by the query. The developer should use the WHERE clause to filter the User records by the Audit_Code__c field, and use the IN operator to pass a list of distinct audit codes that are present in the Account records. This way, the developer can avoid querying all the User records in the org, and only query the ones that have a matching audit code with the Account records. Adding an initial SOQL query to get all distinct audit codes will not help, as it will only increase the number of queries, and it will not reduce the number of User records that are queried. Building a Map<string, List<Account>> of audit code to accounts will not help, as it will only change the data structure, but it will not reduce the number of User records that are queried. Building a Map<Id, List<string>> of Account Id to audit codes will not help, as it will only change the data structure, but it will not reduce the number of User records that are queried. Reference: [SOQL SELECT Syntax], [Apex Developer Guide]
NEW QUESTION # 54
Given a list of Opportunity records named opportunityList, which code snippet is best for querying all Contacts of the Opportunity's Account?
- A.
- B.
- C.
- D.
Answer: C
NEW QUESTION # 55
A developer has a Batch Apex process, Batch_Account_Sales, that updates the sales amount for 10,000 Accounts on a nightly basis. The Batch Apex works as designed In the sandbox. However, the developer cannot get code coverage on the Batch Apex class.
The test class is below:
What is causing the code coverage problem?
- A. The batch needs more than one account record created.
- B. The executeBatch must fail within test. startTest ( ) and - test. stopTest().
- C. The account creation already sets the sates amount to 0.
- D. The batch process will not recognize new accounts created in the same session
Answer: D
NEW QUESTION # 56
A developer wrote a test class that successfully asserts a trigger on Account, It fires and updates data correctly In a sandbox environment.
A Salesforce admin with a custom profile attempts to deploy this trigger via a change set into the production environment, but the test class falls with an Insufficient privileges error.
What should a developer do to fix the problem?
- A. Add seeallData=true to the test class to work within the sharing model for the production environment.
- B. Add System.runAs() to the test class to execute the trigger as a user with the correct object permissions.
- C. Configure the production environment to enable
"Run All Tests as Admin User." - D. Verify that Test. startTest() Is not Inside a For loop in the test class,
Answer: B
Explanation:
When a test class fails with an "Insufficient privileges" error during deployment, it indicates that the user profile under which the tests are being executed doesn't have the necessary permissions to perform the actions required by the test. In a sandbox, the test might have been running with a different set of permissions compared to the production environment.
By using System.runAs(), you can specify a user context in which the test should run, which allows you to simulate the appropriate permissions. For this to work, you need to create a User instance in your test class with the profile that has the necessary permissions and then enclose the logic of your test within a System.
runAs() block with this user.
This is a preferred solution over seeAllData=true, which would give the test access to all data in the production environment, potentially leading to tests that are not isolated and thus less reliable. It's also preferred over changing organization-wide settings or relying on specific setup in test classes, such as making sure Test.startTest() is not inside a loop.
References:
Salesforce Documentation on Using the runAs Method: Testing with the runAs Method Salesforce Help Article on System Permissions: Profiles and Permissions
NEW QUESTION # 57
A developer created three Rollup Summary fields: Total_timesheets_c, Total_Approved_timesheet_c and Total_project_Timesheet_c in the custom object, project _c
Now, the developer is tasked with created a new field to show the ratio between and approved
- A. Using a formula field reduces maintenance overhead.
- B. A formula field will calculate the value retroactively for existing records.
- C. No test methods will be executed during deployment.
- D. A test class that validates the formula field is needed for deployment.
Answer: A,B
NEW QUESTION # 58
A developer has a page with two extensions overriding the Standard controller for Case.
What will happen when a user clicks the command button?
- A. Save from CaseExtensionTwo will be executed
- B. Save from CaseExtensionOne will be executed
- C. All of the three Save methods will be executed
- D. Save from Case Standard Controller will be executed
Answer: B
NEW QUESTION # 59
When the code is executed, the callout is unsuccessful and the following error appears within the Developer Console:
System.CalloutException: Unauthorized endpoint
Which recommended approach should the developer implement
to resolve the callout exception?
- A. Annotate the getkRFCatalogContents method with @Future (Callout-true),
- B. Create a remote site setting configuration that includes the endpoint.
- C. Change the access modifier for ERPCatalog from public to global.
- D. Use the SetHeader() method to specify Basic Authentication,
Answer: C
NEW QUESTION # 60
......
Salesforce PDII Actual Questions and Braindumps: https://www.pass4guide.com/PDII-exam-guide-torrent.html
PDII dumps & Salesforce Developers sure practice dumps: https://drive.google.com/open?id=1GMnpSVwdR-GqmwhDMN14DJw_z3cd3Z-2