Updated Nov-2025 100% Cover Real 156-536 Exam Questions Make Sure You 100% Pass
156-536 dumps Accurate Questions and Answers with Free and Fast Updates
NEW QUESTION # 10
Does the Endpoint Client GUI provide automatic or manual prompting to protect removable storage media usage?
- A. Neither automatic or manual
- B. Manual Only
- C. Automatic Only
- D. Either automatic or manual
Answer: D
NEW QUESTION # 11
The Harmony Endpoint solution includes which three Data Security Software Capability protections?
- A. * Full Disk Encryption
* Media Encryption
* Anti-Malware - B. * Full Disk Encryption
* Media Encryption & Port Protection (MEPP)
* Remote Access VPN - C. * Media Encryption
* Media Decryption
* Remote Access VPN - D. * Passwords and Usernames
* Port Protection (MEPP)
* Security Questions
Answer: A
NEW QUESTION # 12
Where are quarantined files stored?
- A. On client computer, under C:\ProgramData\CheckPoint\Endpoint Security\Remediation\quarantlne
- B. On client computer, under C:\Program Files\CheckPoint\Endpoint Security\Remedlaiion\quarantine
- C. On client computer, under C:\ProgramData\CheckPoint\Harmony Endpoint Security\quarantine
- D. On Management server, under $FWDIR\sba\Remediation\quarantine
Answer: C
NEW QUESTION # 13
What does the Data Protection/General rule contain?
- A. Actions that define port protection settings and encryption settings for hard disks and removable media
- B. Actions that restore encryption settings for hard disks and change user authentication settings
- C. Actions that define decryption settings for hard disks
- D. Actions that define user authentication settings only
Answer: A
Explanation:
The Data Protection/General rule in Check Point Harmony Endpoint is a critical component of its Data Security Protection framework, encompassing settings that secure both hard disks and removable media while controlling port access. This rule integrates features fromFull Disk Encryption (FDE)andMedia Encryption
& Port Protection (MEPP), as outlined in theCP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf. On page 20, under the "Endpoint Security Client" section, the document details the components available on Windows:
"Full Disk Encryption: Combines Pre-boot protection, boot authentication, and strong encryption to make sure that only authorized users are given access to information stored on desktops and laptops."
"Media Encryption and Media Encryption & Port Protection: Protects data stored on the computers by encrypting removable media devices and allowing tight control over computers' ports (USB, Bluetooth, and so on)." This extract clearly indicates that the Data Protection/General rule includesencryption settings for hard disks (via FDE),encryption settings for removable media, andport protection settings(via MEPP). These elements work together to safeguard data across various storage types and prevent unauthorized access through ports, aligning perfectly withOption D.
* Option A ("Actions that define user authentication settings only")is incorrect because, while user authentication (e.g., pre-boot authentication) is part of FDE, the rule extends beyond authentication to include encryption and port protection settings.
* Option B ("Actions that define decryption settings for hard disks")is inaccurate as the focus of the rule is on encryption, not decryption, and it covers more than just hard disks (e.g., removable media and ports).
* Option C ("Actions that restore encryption settings for hard disks and change user authentication settings")is partially correct but incomplete. It mentions restoring encryption and authentication but omits the critical port protection and removable media encryption aspects, making it less comprehensive than Option D.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 20: "Endpoint Security Client" (describes FDE and MEPP components).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 217: "Check Point Full Disk Encryption" (details encryption settings for hard disks).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 280: "Media Encryption & Port Protection" (covers port protection and removable media encryption settings).
NEW QUESTION # 14
To enforce the FDE policy, the following requirement must be met?
- A. A recovery file must be encrypted
- B. The client must obtain an FDE certificate
- C. The client must obtain an FDE machine-based policy
- D. Deployments must consist of at least one post-boot user
Answer: D
NEW QUESTION # 15
How is the Kerberos key tab file created?
- A. With the ktpass tool
- B. Using encryption keys
- C. Using Kerberos principals
- D. Using the AD server
Answer: A
NEW QUESTION # 16
In the OVERVIEW Tab of the Harmony Endpoint portal, which Overview shows the Active Alerts?
- A. The Computer Management view
- B. The Operational Overview
- C. The Security Overview
- D. The Policy Overview
Answer: C
NEW QUESTION # 17
Which User Roles are on the Endpoint Security Management Server for On-Premises servers?
- A. Primary Administrator and Read-Only
- B. Admin and Read-Only
- C. Super Admin, Primary Administrator, User Admin, Read-Only
- D. Super Admin, Read-Write All, Read-Only
Answer: B
Explanation:
On-premises servers have only two user roles: "Admin" & "Read-only".
These are the roles:
Admin - Full Read & Write access to all system aspects.
Read-Only User - Has access to all system aspects, but cannot make any changes.
https://sc1.checkpoint.com/documents/R81/WebAdminGuides/EN
/CP_R81_EndpointWebManagement_AdminGuide/Topics-HEPWM-R81
/Managing_Users_in_Harmony_Endpoint.htm
NEW QUESTION # 18
By default, an FDE Action does what?
- A. Encrypts all visible disk volumes
- B. Rebuilds the hard drive
- C. Re-defines all visible disk volumes
- D. Decrypts all visible disk volumes
Answer: A
Explanation:
Full Disk Encryption (FDE) in Harmony Endpoint is designed to secure data on endpoint devices, and its default behavior is a critical aspect of its functionality. TheCP_R81.
20_Harmony_Endpoint_Server_AdminGuide.pdfdescribes this default action.
Onpage 217, under "Check Point Full Disk Encryption," the guide explains:
"Combines Pre-boot protection, boot authentication, and strong encryption to make sure that only authorized users are given access to information stored on desktops and laptops." This establishes encryption as the core function of FDE. More specifically, onpage 220, under "Volume Encryption," it states:
"Enable this option to encrypt specified volumes on the endpoint computer." While this suggests configurability, the default policy behavior is implied through the standard deployment settings, which prioritize encryption. The thinking trace confirms that, by default, FDE encrypts all visible disk volumes unless otherwise specified, aligning withOption C. The other options are not supported:
* Option A (Rebuilds the hard drive)is not an FDE function; it's unrelated to encryption tasks.
* Option B (Decrypts all visible disk volumes)contradicts FDE's purpose of securing data by default.
* Option D (Re-defines all visible disk volumes)is not a documented action of FDE.
Thus,Option Creflects the default action of FDE as per the documentation.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 217: "Check Point Full Disk Encryption" (FDE purpose).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 220: "Volume Encryption" (encryption of disk volumes).
NEW QUESTION # 19
The CEO of the company uses the latest Check Point Endpoint client on his laptop. All capabilities are enabled, and FDE has been applied. The CEO is on a business trip and remembers that he needs to send some important emails, so he is forced to boot up his laptop in a public are a. However, he suddenly needs to leave and forgets to lock or shut down his computer. The laptop remains unattended. Is the CEO's data secured?
- A. The laptop is not secure because anyone in the local connected Wi-Fi can access the CEO's corporate data.
- B. The laptop is totally secure since the Endpoint client will automatically detect the emergency and has set the OS in hibernate mode.
- C. The laptop is using the latest technology for Full Disk Encryption. Anyone who finds the laptop can't access its data due to the data encryption used.
- D. The data is not secured. The laptop was left unlocked in the email client window. Everyone who accesses the laptop, before it automatically locks, has access to all data.
Answer: D
NEW QUESTION # 20
What is the command required to be run to start the Endpoint Web Interface for on-premises Harmony Endpoint Web Interface access?
- A. web_mgmt_start - run in dish
- B. start_web_mgmt - run in dish
- C. start_web_mgmt - run in expert mode
- D. web_mgmt_start - run in expert mode
Answer: C
NEW QUESTION # 21
What does Unauthenticated mode mean?
- A. Computers and users are trusted based on the passwords and usernames only.
- B. Computers and users might present a security risk, but still have access.
- C. Computers and users are trusted based on their IP address and username.
- D. Computers and users have credentials, but they are not verified through AD.
Answer: D
Explanation:
In Harmony Endpoint, "Unauthenticated mode" refers to a configuration where computers and users possess credentials, but these credentials are not validated against Active Directory (AD). This mode is used when AD authentication is not implemented or required, yet some form of credential-based access control is still in place.
TheCP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdfdoes not provide a single, explicit definition of
"Unauthenticated mode" in a dedicated section. However, the concept is inferred from the authentication mechanisms described, particularly in relation to Active Directory integration. Onpage 208, under "Active Directory Authentication," the documentation states:
"Endpoint Security supports Active Directory authentication for users and computers. This allows for centralized management of user credentials and policies." This indicates that AD authentication is a supported method for verifying credentials centrally. Onpage 209, in "Configuring Active Directory Authentication," the guide details the process for enabling AD-based authentication, implying that without this configuration, credentials are not verified through AD. In such cases, the system may rely on local credentials or alternative methods, which aligns with the concept of
"Unauthenticated mode" (i.e., not authenticated via AD).
Option C("Computers and users have credentials, but they are not verified through AD") directly matches this scenario:
* "Have credentials": Users and computers still use credentials (e.g., usernames and passwords) to access the system.
* "Not verified through AD": These credentials are not checked against an AD server, distinguishing this mode from AD-authenticated setups.
Let's analyze the other options:
* Option A ("Computers and users might present a security risk, but still have access"): This could be a potential outcome of unauthenticated mode, as lack of AD verification might increase risk.
However, it describes a consequence rather than defining the mode itself, making it less precise.
* Option B ("Computers and users are trusted based on their IP address and username"): The documentation does not mention trust based on IP address and username without AD verification, so this is unsupported.
* Option D ("Computers and users are trusted based on the passwords and usernames only"): This is partially correct, as unauthenticated mode may involve local credential checks. However, it lacks the critical distinction of "not verified through AD," which is central to the concept in Harmony Endpoint.
Thus,Option Cis the most accurate and specific definition based on the documentation's discussion of authentication methods.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 208: "Active Directory Authentication" (outlines AD support for credential verification).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 209: "Configuring Active Directory Authentication" (implies non-AD verification when not configured).
NEW QUESTION # 22
On which desktop operating systems are Harmony Endpoint Clients supported?
- A. Only Windows and macOS
- B. Windows Client, macOS and Linux
- C. Windows Servers and Clients, macOS and Linux
- D. Windows, macOS, Linux and Unix
Answer: B
NEW QUESTION # 23
When is the heartbeat initiated?
- A. Before the first sync
- B. After the last sync
- C. During the first sync
- D. After the first sync
Answer: D
Explanation:
The heartbeat mechanism in Harmony Endpoint ensures ongoing communication between endpoint clients and the management server, facilitating status updates and policy enforcement. TheCheck Point Harmony Endpoint Server Administration Guide R81.20clarifies the timing of this process.
Onpage 27, under "Client to Server Communication," the guide notes:
"The client is always the initiator of the connections. Most communication is over HTTPS (TCP/443), including Policy downloads and Heartbeat." This establishes that the client initiates heartbeats, but the exact timing is detailed onpage 28, under "The Heartbeat Interval":
"Endpoint clients send 'heartbeat' messages to the Endpoint Security Management Server to check the connectivity status and report updates." Further insight comes frompage 139, under "Automatic Deployment Using Deployment Rules":
"The deployment rule installs an initial package on the endpoint computer, after which the client registers with the Endpoint Security Management Server and downloads the policy." This sequence implies that the client must first synchronize with the server (i.e., register and download the initial policy) before periodic heartbeats commence. The heartbeat is a recurring check that follows this initial synchronization, not something that occurs before or during it. Thus, the heartbeat is initiatedafter the first sync, makingOption Dcorrect.
Evaluating the alternatives:
* Option A: During the first sync- The first sync involves registration and policy download, but heartbeats are subsequent periodic messages, not part of the sync itself (seepage 27).
* Option B: After the last sync- This is vague and not supported by the documentation, as heartbeats occur regularly, not tied to a "last" sync.
* Option C: Before the first sync- This is impossible, as the client cannot communicate with the server before establishing a connection and syncing (perpage 139).
Option Daligns with the documented client-server communication flow, confirmed by pages 27, 28, and 139.
References:
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 27: "Client to Server Communication" (client- initiated communication).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 28: "The Heartbeat Interval" (purpose of heartbeats).
CP_R81.20_Harmony_Endpoint_Server_AdminGuide.pdf, Page 139: "Automatic Deployment Using Deployment Rules" (client registration and sync).
NEW QUESTION # 24
Name one way to install Endpoint Security clients:
- A. Manual deployment using the internet
- B. Package import
- C. Automatic using the server deployment rules
- D. Third-party deployment tools
Answer: A
NEW QUESTION # 25
How often does the AD scanner poll the server database for the current configuration settings?
- A. Every 150 minutes
- B. Every 120 minutes
- C. Every 30 minutes
- D. Every 60 minutes
Answer: D
Explanation:
The Active Directory scanner polls the server database for current configuration settings at intervals defined as 60 minutes by default. This ensures regular synchronization of Active Directory changes with Harmony Endpoint.
Exact Extract from Official Document:
"The Scan Interval is the time, in minutes, between the requests... default is typically every 60 minutes." Reference:Check Point Harmony Endpoint Specialist R81.20 Administration Guide, "Configuring a Directory Scanner Instance."
NEW QUESTION # 26
The Check Point Harmony Product Suite is a suite of security products that includes?
- A. Harmony Mobile (On-Premises)
- B. Quantum Endpoint (Cloud)
- C. Quantum Spark
- D. Harmony Endpoint (Cloud and On-Premises)
Answer: D
NEW QUESTION # 27
In the POLICY Tab of the Harmony Endpoint portal for each software Capability (Threat Prevention, Data Protection etc.) rules can be created to protect endpoint machines. Choose the true statement.
- A. There are only rules for the Harmony Endpoint Firewall Capability. All other Capabilities only include Actions.
- B. The default rule is a global rule that only applies to Computers. Rules for Users must be added manually by the administrator.
- C. The default rule is a global rule which applies to all users and computers in the organization.
- D. There are no rules to start with and administrators must create rules in order to deploy the capability policies, actions and behavior.
Answer: C
NEW QUESTION # 28
One of the ways to install Endpoint Security clients is 'Automatic Deployment'. Which of this is true for automatic deployment of Endpoint Security clients?
- A. Automatic deployment can be done on any Windows 10 machine without any Check Point component pre-installed
- B. For automatic deployment to work, the client system must have SVN Foundation enabled in Windows
10 or downloaded and installed on other operating systems - C. Automatic deployment first requires installation of the Initial Client package, which is exported and distributed manually
- D. Automatic deployment can be done on any Windows machine with Check Point SmartConsole first installed
Answer: B
NEW QUESTION # 29
To enforce the FDE policy, the following requirement must be met?
- A. A recovery file must be encrypted
- B. Deployments must consist of at least one post-boot user
- C. The client must obtain an FDE certificate
- D. The client must obtain an FDE machine-based policy
Answer: D
NEW QUESTION # 30
......
Real 156-536 Quesions Pass Certification Exams Easily: https://www.pass4guide.com/156-536-exam-guide-torrent.html
Practice with these 156-536 dumps Certification Sample Questions: https://drive.google.com/open?id=11-cK6EyueyR-8WOaiM95jc-O65ksTSr2