100% Updated Nutanix NCS-Core Enterprise PDF Dumps
Use Valid Exam NCS-Core by Pass4guide Books For Free Website
NEW QUESTION 37
An administrator needs to make sure an RF3 cluster can survive a failure of two complete racks without negatively affecting performance. The current cluster configuration consists of the following:
* 30 All Flash Nodes: distributed 10 nodes per rack across three 42U racks
* Each node is configured with 20TB usable storage all flash (Cluster Total 600TB Usable)
* Current cluster utilization is 500TB storage
* Storage containers have Erasure Coding enabled
Which configuration changes should be made to make sure the cluster meets the requirements?
- A. Expand the cluster to 60 nodes distributed evenly across 6 racks
- B. Expand the cluster to 40 nodes distributed evenly across 5 racks
- C. Expand the cluster to 48 nodes distributed evenly across 6 racks
- D. Expand the cluster to 50 nodes distributed evenly across 5 racks
Answer: A
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_17:arc-configure
NEW QUESTION 38
Refer to the exhibit.
A system administrator is using Range-Autofill tool to assign IP addresses to setup a multi-block cluster based on the following configuration:
Which additional changes must be made during the Foundation process to configure the cluster correctly?
- A. Reorder blocks
- B. Change IP address
- C. Reorder block serial
- D. Change host names
Answer: D
NEW QUESTION 39
An administrator has a 32-node hybrid cluster with CPU, RAM and storage utilization of 80%. A database VM is configured with VM Flash.
What is causing this IO latency?
- A. Curator scans causes by ILM constantly moving data.
- B. Database VM is experiencing high CPU ready time.
- C. VM Flash Mode reduces SSD tier capacity for VMs.
- D. Controller VM is experiencing high CPU ready time.
Answer: D
NEW QUESTION 40
An administrator finds that home shares cannot be configured in a new Files 3.5 deployment. Why is this happening?
- A. Access Based Enumeration is not enabled.
- B. Multi-protocolaccess is not configured.
- C. The system is deployed as a single FSVM.
- D. NFS default access is set to Read Only.
Answer: C
Explanation:
NEW QUESTION 41
Refer to the exhibit.
User 1 and User 2 belong to the AAPM group
What are two descriptions of how Files perform quota management? (Choose two.)
- A. User 2 can add an 8GB file without receivinga notification email.
- B. User 1 can add an 8GB file to the share without receiving notification.
- C. User 1 can continue to add another 5GB file but will receive a daily notification email.
- D. User 2 can continue to add another 3GB file butwill receive a daily notification email.
Answer: A,C
Explanation:
Explanation
Ref:https://portal.nutanix.com/page/documents/details?targetId=Files-v3_6:fil-file-server-quotas-c.html#nconcep
NEW QUESTION 42
An administrator receives reports that VDI desktop performance in an 8-nodeNutanix VDI environment is poor. Opening applications takes between 1 and 2 minutes.
When investigating the issue, the following conditions are found:
* Cluster memory utilization: 80%
* Cluster SSD utilization: 70%
* Average VM CPU Wait Time: 11%
*CVM CPU utilization: 75%
Which action should be taken to improve VDI performance?
- A. Increase the amount of SSD storage in the cluster.
- B. Add memory to the nodes in the cluster.
- C. Increase the number of vCPU cores allocated to the CVM.
- D. Add CPU resources to the cluster.
Answer: D
NEW QUESTION 43
A consultant is installing Nutanix AOS on Cisco UCS.
Which method should be used to install AOS on UCS hardware platforms?
- A. Foundation VM
- B. Foundation Central
- C. Foundation as a Service
- D. Foundation Applet
Answer: A
NEW QUESTION 44
A customer wants to run SAP HANA on a Nutanix cluster with the following characteristics:
* AHV nodes
* SAP HANA version 2
* Production database files
Which configuration should be recommended to the customer?
- A. Do not enable compression, deduplication. or erasure coding on the storage container
- B. Enable only compression for the container that contains the Production database
- C. Start with a cluster containing three or more nodes
- D. Plate the SAP HANA Database on the same socket as CVM
Answer: A
Explanation:
Explanation
Ref:
NEW QUESTION 45
The networking team makes changes to the Top of Rack switches to which the Nutanix cluster are attached. A few VMs are able to communicate with each other on the same node but are unable to connect to other parts of the network.
What is the likely cause of this issue?
- A. Jumbo Frame are misconfigured across ports.
- B. There is a VLAN misconfiguration on the switch.
- C. There is a VLAN misconfigurationon the VMs.
- D. The vNIC port is disconnected on the affected VMs.
Answer: B
NEW QUESTION 46
A consultant runs the Foundation Applet and discovers all the nodes. The consultant wants to use the latest version of Foundation for imaging for support purposes and to cover the latest hardware and software hypervisor support.
What should the consultant do to upgrade Foundation on a node?
- A. Use crash cart and manually upgrade Foundation files on one node.
- B. Use the Foundation Applet to upgrade Foundation on a single node.
- C. Use the Foundation VM to upgrade Foundation on all nodes.
- D. Use latest version of Foundation to reimage all the nodes.
Answer: B
NEW QUESTION 47
An administrator is configuring software only. Data-at-Rest Encryption on their Nutanix cluster. They are planning to deploy a third-party key management server (KMS).
Where should this server be hosted?
- A. On hardware external to the Nutanix duster
- B. As a single VM on the Nutanix cluster
- C. As a clustered VM setup on the Nutanix cluster
- D. As a single VM deployed on the host that contains the Prism leader CVM
Answer: A
Explanation:
NEW QUESTION 48
A consultant needs to verify the make and model of the systems that will be imaged with Foundation. The consultant does not have the Bill of Materials (BOM) available to review.
When should the consultant verify the make and model to prepare for the cluster deployment?
- A. When reviewing the Statement of Work (SOW)
- B. While conducting the Tech Review Call
- C. During the Foundation Process
- D. Upon arriving on-site
Answer: C
NEW QUESTION 49
An administrator deletes a large amount of data from a Volume Group presented to a Linux VM. The administrator notices that the deleted data has not been reclaimed as usable storage.
Whataction should be taken to reclaim the storage capacity?
- A. Enable the unman operation on the Linux VM
- B. Unmount the Volume Group and then Remount the Volume Group
- C. Shrink the Volume Group that is associated with the Linux VM
- D. Run Defrag on the Linux VM
Answer: B
Explanation:
Explanation
https://next.nutanix.com/how-it-works-22/vm-capacity-and-prism-capacity-are-different-33134
NEW QUESTION 50
A consultant is using the Foundation applet to create a cluster. During the process the consultant refreshes the progress bar web page and is concerned when nothing loads.
What should the consultant do to verify that Foundation has completed successfully?
- A. Restart the Foundation process.
- B. Update Java on the Foundation VM.
- C. Connect to any CVM IP address from a web browser.
- D. Return to the Foundation configuration page and start over.
Answer: C
NEW QUESTION 51
A customer has an ESXi Cluster with two 10GbE NICs on each node with the following requirements:
* Solution must follow Nutanix Best Practices
* Network configuration should be redundant
* A vSphere Standard Switch must be utilized
Which load balancing method should be used?
- A. Route based on IP hash
- B. Route based on physical NIC load
- C. Route based on source MAC hash
- D. Route based on originating port ID
Answer: D
NEW QUESTION 52
Which subnet is reserved for internal connectivity within a Nutanix Cluster?
- A. 192.168.5.0/24
- B. 192.168.5.0/26
- C. 192.168.5.0/23
- D. 192.168.254.0/24
Answer: A
NEW QUESTION 53
A consultant is preparing to add new nodes into an existing cluster. The current cluster AOS version is 5.8.
The new expansion node is currently running AOS 5.9 code. The cluster must continue to run at its current AOS version.
Which method can be used to successfully add the node?
- A. Use the CLI and enter cluster add-node node-serial="node_serial".
- B. Upgrade the cluster to 5.9 and add the node through Prism Element.
- C. Use Prism Element, which will downgrade the node by default during the node add process.
- D. Use Prism Element to Expand the cluster and select the re-image option.
Answer: D
NEW QUESTION 54
An administrator needs to maximize storage potential in a six-node cluster. The container is configured with the following:
* Post-process compression
* Capacity deduplication
What should the administrator configure to increase space savings?
- A. Erasure coding
- B. Reserve capacity
- C. Cache dedupe
- D. Inline compression
Answer: A
NEW QUESTION 55
......
Nutanix NCS-Core Official Cert Guide PDF: https://www.pass4guide.com/NCS-Core-exam-guide-torrent.html
Free NCS Professional NCS-Core Official Cert Guide PDF Download: https://drive.google.com/open?id=1cEsxwVc77x9_TbKsGXb6CZfirMq3wIwl