Aug-2021 Latest Pass4guide CTAL-TM_Syll2012 Exam Dumps with PDF and Exam Engine Free Updated Today!
Following are some new CTAL-TM_Syll2012 Real Exam Questions!
NEW QUESTION 13
Test Management
You are performing a quality risk analysis for a CSCI (Computer Software Configuration Item) used to implement a CBIT (Continuous Built-In Test) module of a safety-critical system.
During the quality risk analysis you are trying to identify the ways in which failures of the CBIT module can occur, for each of them trying to determine the potential causes and likely effects, and the risk level (calculated as the product of three factors: severity, occurrence and detection).
Which of the following risk analysis techniques are you working with?
- A. A lightweight product risk analysis technique
- B. Cost of Exposure
- C. Wide Band Delphi
- D. Failure Mode and Effect Analysis
Answer: D
Explanation:
Section: Test Management
NEW QUESTION 14
The following is the unique "critical" quality risk item that has been identified:
CR-RSK-1. The GUI of the application might accept non-integer values for the input field designed to get the number of bottles from the user Test analysis for system testing has just begun and the following test conditions have been identified:
TC-SEL-2. Test the selection of the package sizes
TC-SEL-4. Test wrong numbers of bottles for an order
TC-CR-RSK-1. Test the accepted values from the input field designed to get the number of bottles from the user Assume that you have used traceability to determine the logical test cases that cover all the requirements and the single risk item identified in that scenario.
Which of the following is a positive logical test that is complete and correct, and covers the REQ-SEL-4 requirement?
- A. Select a 6-bottles package, then try to insert 7 bottles; verify that the "Invalid number of bottles" message is displayed
- B. Select a 6-bottles package, then try to insert 7 bottles; verify that no error messages are displayed
- C. Select a 6-bottles package, then try to insert 5 bottles; verify that no error messages are displayed
- D. Select a 6-bottles package, then try to insert 7 bottles
Answer: A
Explanation:
Section: Testing Process
NEW QUESTION 15
Test Management
You are the Test Manager on a project following an iterative life-cycle model. The project should consist of nine iterations of one month duration each. It is planned to develop the most important features to have a stable core of the application in the first three iterations and to add the additional features in the last six iterations.
At the beginning of the first iteration, only a draft version of the requirements specification document for the core features is available. Assume that during each of the first three iterations, the chosen features are fully completed and unit tested.
Which of the following statements is true in this context?
Number of correct responses: 1
K4 3 credits
- A. You should allocate all the effort for the system test phase only in the last iteration
- B. The system test phase should start when all the requirements are frozen
- C. You should allocate a large effort for system testing during the first three iterations
- D. You should apply the same test strategy as used in a sequential life cycle model
Answer: C
NEW QUESTION 16
Test Management
Consider an agile team adopting Extreme Programming (XP) with five developers and one tester without any coding experience.
To which of the following activities would you expect the tester will contribute most?
- A. Executing unit tests
- B. Supporting the customer in the execution of acceptance testing
- C. Planning and executing tests during the integration test phase to detect interface defects
- D. Developing unit tests
Answer: B
NEW QUESTION 17
The main objectives the senior management team wants to achieve are:
-
to reduce the costs associated with dynamic testing
-
to use reviews to ensure that the project is on course for success and following the plan
-
to use reviews as a well-documented and effective bug-removal activity following a formal process with well-defined roles
-
to determine the effectiveness of reviews in terms of phase containment
-
to improve phase containment effectiveness
Which of the following answers would you expect to describe the best way to achieve these objectives?
K4 3 credits
- A. You should plan for lightweight exit-phase reviews at the end of each development and testing phase, and plan for a process of gathering information from testing to perform an analysis aimed at identifying the larger cluster of defects
- B. You should plan for formal exit-phase reviews at the end of each development and testing phase, and plan for a process of gathering information from testing to perform an analysis aimed at identifying the larger cluster of defects
- C. You should plan for formal exit-phase reviews at the end of each development phase and testing phase, and plan for a process of gathering information from testing to perform an analysis of the bugs found during testing to determine the people responsible for those bugs
- D. You should plan for formal exit-phase reviews at the end of each development and testing phase, and plan for a process of gathering information from testing to perform an analysis of the bugs found during testing to determine the phase in which they have been introduced
Answer: D
Explanation:
Topic 3, Reviews
NEW QUESTION 18
Which of the following statements about the TMMi test process improvement model is true?
K2 1 credit
- A. In TMMi all the process areas at lower levels must be 75% complete by achieving specific and generic goals in order to claim the higher level
- B. At TMMi level 1 testing is chaotic without a defined process, and it is often seen as the same as debugging
- C. TMMi provides an approach for test process improvement such as the IDEAL (Initiating, Diagnosing, Establishing, Acting and Learning) model
- D. TMMi has a staged architecture for process improvement with seven maturity levels
Answer: B
NEW QUESTION 19
Which of the following factors could negatively influence a review?
K2 1 credit
- A. Include people who are detail-oriented and scrupulous at finding issues
- B. Include as many people as possible in order to have more viewpoints about possible problems on the item under review
- C. Include people with the adequate level of knowledge, both technical and procedural
- D. Include people able to contribute to a clear, thoughtful, constructive and objective discussion
Answer: B
NEW QUESTION 20
Test Management
You are the Test Manager on a project following an iterative life-cycle model. The project should consist of nine iterations of one month duration each. It is planned to develop the most important features to have a stable core of the application in the first three iterations and to add the additional features in the last six iterations.
At the beginning of the first iteration, only a draft version of the requirements specification document for the core features is available. Assume that during each of the first three iterations, the chosen features are fully completed and unit tested.
Which of the following statements is true in this context?
- A. You should allocate all the effort for the system test phase only in the last iteration
- B. The system test phase should start when all the requirements are frozen
- C. You should allocate a large effort for system testing during the first three iterations
- D. You should apply the same test strategy as used in a sequential life cycle model
Answer: C
NEW QUESTION 21
You are the Test Manager for a project to develop a web customer portal of a Pay-TV company that allows customers (with a smartcard and a set-top box) to purchase digital contents.
In the "select" page the system displays a dialogue where the customer can select the items (digital contents) he/she is interested in. In this page he/she can add one or more items to a shopping cart. An item consists of a product and a duration.
There are three types of products: Movie, sport and premium (movie and sport).
There are four possible durations: 1 months, 2 months, winter (from the beginning of January to end of March) and summer (from the beginning of July to end of September).
All the combinations of products and durations are allowed to define an item. Thus there are twelve possible items. A maximum of six different items can be added to the shopping cart at a time.
When the customer decides to check out he/she goes to the "purchase" page where he/she can pay the total amount of the shopping cart in three different ways:
-
using a credit voucher
-
using a credit already charged on the smartcard
-
using a credit card (accepted credit cards are. Visa, MasterCard and Great Wall Card)
The customer can logout from both the "select" and "purchase" pages. In this case no purchase is made.
You decide to apply a blended risk-based and reactive testing strategy and the following is a subset of the exit criteria for system testing: EXCR1- Each "critical" quality risk item must be covered by at least one test condition EXCR2- Each "critical" requirement must be covered by at least one test condition
You are following a risk-based testing strategy. The test execution time is very limited. Assume that all the product risk items require more or less the same level of test effort.
Which of the following answers describes the best execution schedule in this scenario?
K3 3 credits
- A. 1- Test the correct pre-activation of the Smart Card 2- Test the correct charge of the Smart Card with the required contents 3- Test the correct activation of the Smart Card 4- Test the acceptance of transactions coming from the IVR channel
- B. 1- Test the acceptance of transactions coming from the IVR channel 2- Test the correct charge of the Smart Card with the required contents 3- Test the correct pre-activation of the Smart Card 4- Test the correct activation of the Smart Card
- C. 1- Test the correct activation of the Smart Card 2- Test the correct pre-activation of the Smart Card 3- Test the correct charge of the Smart Card with the required contents 4- Test the acceptance of transactions coming from the IVR channel
- D. 1- Test the correct pre-activation of the Smart Card 2- Test the correct activation of the Smart Card 3- Test the correct charge of the Smart Card with the required contents 4- Test the acceptance of transactions coming from the IVR channel
Answer: D
NEW QUESTION 22
The following are the requirements identified as "critical":
REQ-SEL-001. The user shall be able to combine all the three products with all the four durations to define an item to purchase REQ-SEL-002. The user shall be able to add a maximum of six different items to the shopping cart REQ-PUR-001. The user shall be able to purchase all the items in the shopping cart using a credit voucher REQ-PUR-002. The user shall be able to purchase all the items in the shopping cart using the available credit already charged on the smartcard REQ-PUR-003. The user shall be able to purchase all the items in the shopping cart using all the accepted credit cards (Visa, MasterCard and Great Wall Card) REG-LOGO-001. The user shall be able to logout (by clicking the logout button) from both the "select" and
"purchase" pages going back to the "browse" page (anonymous navigation) Moreover the following quality risk item has been identified as "critical":
QR-P1. The web customer portal might not be able to provide the expected response time (less than 10 sec) for the purchase transactions under a load of up-to 1000 concurrent users Test analysis for system testing has just begun and the following test conditions have been identified:
TC-SEL-01. Test the combinations of products and durations to define an item to purchase TC-SEL-02. Test the maximum number of items, which can be added to the shopping cart TC-PUR-01. Test the purchase of an item TC-PUR-02. Test the purchase of an item with the credit charged on the smartcard Assume that you have used traceability to determine the logical test cases that cover all the requirements and the single risk item identified in that scenario.
Which of the following is a positive logical test that is complete, is correct, and covers the REG-LOGO-001 requirement?
Number of correct responses: 1
K3 2 credits
- A. On the select page ("select state"), click the logout button
- B. On the purchase page ("purchase state"), click the logout button; verify that the browse page ("browse state") is displayed
- C. On the purchase page ("purchase state"), click the logout button; verify that the "Impossible to logout - complete or cancel the current transaction" message is displayed
- D. On the browse page ("browse state"), click the logout button
Answer: B
NEW QUESTION 23
Test Management
In the next two months some new features will be constantly added to new releases of a project you are working on as Test Manager.
You have identified as one of the main project risks, that the requirements specification will still be incomplete when your team starts the test design and implementation phase.
Some requirements will most likely be completed too late to allow a proper test preparation.
You and your test team have already worked on several similar past projects in the same organization.
Which one of the following options would you expect to be the most effective at mitigating this risk?
- A. Even if there are only few details missing, escalate the risk to the project manager without preparing any tests
- B. Make reasonable assumptions about the missing details and design lightweight tests that can be easily updated during test execution
- C. Don't design any test until the test execution starts, then communicate that test execution is blocked due to incomplete requirements
- D. Don't prepare any test and just run the regression test suite to check that the new features don't introduce regression
Answer: B
Explanation:
Section: Test Management
NEW QUESTION 24
Test Management
You are working on a project to develop an authentication system for an e-commerce website. This system provides two features: Registration and authentication. Two different development teams develop these two features.
There is a high likelihood that the delivery of the authentication feature to the test team will be three weeks later. To complete the registration the user must provide the following registration inputs: Name, surname, birthdate, fiscal code and he/she can select a username and a password.
A registered user can be a special user or a normal user. To be identified as a special user, he/she must also provide, during the registration process, a voucher possibly received from the IT department.
Access is granted only if a user is registered and the password is correct: In all other cases access is denied. If the registered user is a special user and the password is wrong, a special warning is shown on the system console.
You are currently performing a quality risk analysis using FMEA.
Based only on the given information, which of the following is NOT a product risk that could be identified during the quality risk analysis?
- A. The late delivery of the authentication feature to the test team causes delays in the start of test execution and this could result in a shorter test period
- B. The authentication system grants access to a special user with a wrong password
- C. The authentication system denies access for a special user with a wrong password, but doesn't display a special warning on the system console
- D. The authentication system grants access to a normal user with a wrong password
Answer: A
Explanation:
Section: Test Management
NEW QUESTION 25
Test Management
In the next two months some new features will be constantly added to new releases of a project you are working on as Test Manager.
You have identified as one of the main project risks, that the requirements specification will still be incomplete when your team starts the test design and implementation phase.
Some requirements will most likely be completed too late to allow a proper test preparation.
You and your test team have already worked on several similar past projects in the same organization.
Which one of the following options would you expect to be the most effective at mitigating this risk?
- A. Even if there are only few details missing, escalate the risk to the project manager without preparing any tests
- B. Make reasonable assumptions about the missing details and design lightweight tests that can be easily updated during test execution
- C. Don't design any test until the test execution starts, then communicate that test execution is blocked due to incomplete requirements
- D. Don't prepare any test and just run the regression test suite to check that the new features don't introduce regression
Answer: B
NEW QUESTION 26
You are the Test Manager of a project that adopts a V-model with four formal levels of testinG. unit, integration, system and acceptance testing.
On this project reviews have been conducted for each development phase prior to testing, which is to say that reviews of requirements, functional specification, high-level design, low-level design and code have been performed prior to testing.
Assume that no requirements defects have been reported after the release of the product.
Which TWO of the following metrics do you need in order to evaluate the requirements reviews in terms of phase containment effectiveness?
K3 2 credits
- A. Time to conduct the requirements review
- B. Total number of defects found during functional specification review, high-level design review, low-level design review, code review, unit testing, integration testing, system testing and acceptance testing
- C. Number of defects found during the requirements review
- D. Total number of defects attributable to requirements, found during functional specification review, high-level design review, low-level design review, code review, unit testing, integration testing, system testing and acceptance testing
- E. Total number of defects attributable to requirements found during unit, integration, system and acceptance testing
Answer: C,D
Explanation:
Topic 4, Defect Management
NEW QUESTION 27
Consider the following skills assessment spreadsheet for your test team (consisting of four team members):
This spreadsheet has three sections: technical expertise, testing skills and professionalism.
The skill levels for each skill area for both the "technical expertise" and "testing skills" sections have been rated on a four-point scale:
-E (Expert): indicates that a person has expert knowledge and experience in the skill area
-B (Beginner): indicates that a person has some knowledge and experience in the skill area but he/she is not autonomous
-W (Wants to learn): indicates that a person has no knowledge or experience in the skill area but he/she wants to learn that skill
-NI (Not Interested): indicates that a person has no knowledge or experience in the skill area and he/she is not interested to learn that skill
The skill levels for each skill area of the "professionalism" section have been rated on a three point scale (H=High, M=Medium, L=Low).
Consider the following analysis of testing skills performed on four peoplE. Alex, Robert, John and Mark (all the skills have been rated on an ascending scalE. The higher the score, the better the skill): Which of these people, based on this analysis, would you expect to be most suitable to work specifically as test designer?
K4 3 credits
- A. John
- B. Alex
- C. Mark
- D. Roberta
Answer: D
NEW QUESTION 28
......
Resources From:
- 2021 Latest Pass4guide CTAL-TM_Syll2012 Exam Dumps (PDF & Exam Engine) Free Share: https://www.pass4guide.com/CTAL-TM_Syll2012-exam-guide-torrent.html
- 2021 Latest Pass4guide CTAL-TM_Syll2012 PDF and CTAL-TM_Syll2012 Exam Dumps Free Share: https://drive.google.com/open?id=1U1UMsKe5hmCm5VNJ0jDIz17gs-qhhnCS
Free Resources from Pass4guide, We Devoted to Helping You 100% Pass All Exams!