[Aug 23, 2026] OmniStudio-Developer Exam Dumps - Try Best OmniStudio-Developer Exam Questions - Pass4guide
Verified OmniStudio-Developer exam dumps Q&As with Correct 183 Questions and Answers
Earning the Salesforce OmniStudio-Developer certification is a significant accomplishment that can help professionals advance their careers. Salesforce Certified OmniStudio Developer certification is recognized by employers and clients as a symbol of excellence in OmniStudio development. With this certification, professionals can demonstrate their expertise in developing and customizing solutions using the OmniStudio platform, which can lead to better job opportunities and higher salaries.
NEW QUESTION # 27
A developerneedsto configure a calculation procedure to calculation a subtotal using two different depending on whether the input Boolean variable is Customer is set to true or false.
How should a developer configurethe calculationprocedure to conditionally execute the correct formula?
- A. Use two separate Calculation Steps with the Conditional Step property selected: compare theisCustomer variable directly to the literal true and false values in the Condition syntax.
- B. Use two separate Calculation Steps with the Conditional Step property selected: use theISTRUE (is Customer) and NOT (ISTRUE) (is Customer) functions in the Condition syntax.
- C. Use two separate Calculation Steps with the Conditional Step property selected: reference just theis Customervariable in the Conditional syntax (no comparison necessary)
- D. Use a single Calculation Steps with IF statement directly in the formula definition to reference the isCustomervariable and conditionally perform theappropriate calculation.
Answer: B
Explanation:
Using two separate Calculation Steps with the Conditional Step property selected allows the developer to specify different formulas based on different conditions. The ISTRUE(isCustomer) and NOT(ISTRUE(isCustomer)) functions are used to evaluate the Boolean variable in the Condition syntax. The other options are either missing the Conditional Step property, using incorrect comparison operators, or using an IF statement instead of separate Calculation Steps.
NEW QUESTION # 28
Refer to the exhibit below.
What is the reason that the fields fail to display the fetched data?
- A. The typeHead key is not in the correct format.
- B. FirstName, LastName, and BirthDate are not placed inside the Type Ahead Block.
- C. Use Data JSON is Not selected in the properties of the Type Ahead Block.
- D. Lookup Mode is selected in the properties of the Type Ahead Block.
Answer: C
Explanation:
The Use Data JSON property must be selected in the properties of the Type Ahead Block in order to display the fetched data in the fields. The Lookup Mode property is used to specify the type of lookup to perform. The FirstName, LastName, and BirthDate fields can be placed inside or outside the Type Ahead Block. The typeHead key is in the correct format.
NEW QUESTION # 29
Refer to the exhibit below. What is the marge code needed for this integration procedure structure to pass a CaseNumber node from the DRReadCase DataRaptor Extract Action to the HTTP Action's HTTP URL?
- A. ((CaseNumber))
- B. %DRReadCase: CaseNumber%
- C. MTTOPDetCaseDetail: CaseNumber%
- D. ((DRRCase, CaseNumber))
Answer: B
Explanation:
The merge code syntax for passing data from a DataRaptor Extract Action to an HTTP Action is % DataRaptorName: NodeName%. In this case, it is %DRReadCase: CaseNumber%.
NEW QUESTION # 30
You have so many fields on a FlexCard that it looks cluttered. Based on best practices, what is the most efficient way to declutter it?
- A. Use a child FlexCard
- B. Delete some of the actions
- C. Use a flyout action
- D. Use a datatable or chart element
Answer: C
NEW QUESTION # 31
Refer to the following row-versioned calculation matrix.
The developer needs to delete the row that contains the Code CA-SF.
If the developer deletes that row in Version 3, whatis the result?
- A. The row is deleted In Versions 2 and 3 but will remain in Version 1.
- B. The row is deleted in all versions
- C. The row is deleted only in Version 3.
- D. The row is deleted in Version 3 and Version 1.
Answer: C
Explanation:
Deleting a row in Version 3 will only affect that version, not any previous or future versions. The row that contains the Code CA-SF will remain in Versions 1 and 2, as well as any versions created after Version 3. The other options are incorrect because they imply that deleting a row in one version will affect other versions as well.
NEW QUESTION # 32
A developer needs to build a DataRaptor Transform to send current weather to both an OmniScript Card Layout. Which of these samples would be valid for the Expected Output JSON?
- A.
- B.
- C.
- D.
Answer: B
Explanation:
According to the Transform External Data Unit, the Expected Output JSON should match the Output Path of the DataRaptor Transform. In option D, the Output Path is Current:CityState, which matches the Expected Output JSON. The other options have different Output Paths that do not match the Expected Output JSON.
Therefore, the correct answer is D.
NEW QUESTION # 33
A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
- A. Both parent and embedded OmniScripts have the same element name for the Set Values element.
- B. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
- C. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- D. The flag passData.JSON in the parent OmniScript in not configured correctly.
Answer: C
NEW QUESTION # 34
Refer to the exhibit.
A developer has configured an integration Procedure element with SEND/RESPONSETRANFORMATIONS as shown.
Alternatively, how could the developer configure Additional input to send exactly the same data? Assume that the developer checked Send Only Additional input.
- A.
- B.
- C.
Answer: A
Explanation:
Option C is the correct way to configure Additional input to send exactly the same data as Input Data. The Additional input should have a key/value pair for each field in Input Data, and the value should be set to
{{InputData.field}} for each field. This will pass the value of Input Data for each field to Additional input.
NEW QUESTION # 35
On a FlexCard canvas, several fields display with Salesforce data, but one of the fields shows only the label.
What could cause this?
- A. In the Setup Panel, {recordid} is misspelled in the Data Source Input Map.
- B. There are no Test Data Test Parameters configured.
- C. The card state only supports a limited number of fields for display.
- D. The field is null in the Salesforce record.
Answer: D
NEW QUESTION # 36
A developer creates a FlexCard with five state elements. For of the states have a condition. To test the FlexCard, the developer previews it using sample data that causes two of the states to have true conditions.
In this scenario, how will the developer know which state will display?
- A. The first state with a true AND condition, regardless of sequence in the FlexCard canvas, will display.
- B. The first state with true nested condition, regardless of sequence in the FlexCard canvas, will display
- C. The first state with true conditions sequence closest to the top of the FlexCard canvas will display.
- D. The state sequenced first in the FlexCard canvas will display.
Answer: C
NEW QUESTION # 37
An OmniStudio Developer at Coral Cloud Resorts needs to modify an existing OmniScript. The script currently displays customer data, but a new requirement states that if the customer is a " VIP member " , a special offers section must appear. The data identifying a VIP member exists within the OmniScript ' s data JSON. The developer must choose between using an Integration Procedure to return different UI metadata or using a client-side OmniScript feature. Given the requirement to make this change efficiently without server- side processing, which approach should the developer take?
- A. Use an Integration Procedure to conditionally add a metadata flag.
- B. Use a new version of the OmniScript.
- C. Use the Conditional View property on the special offers element.
- D. Use a Data Mapper Transform to change the data structure.
Answer: C
Explanation:
The requirement is only to show or hide a section based on a value already present in the OmniScript data JSON. That is exactly what Conditional View is designed for. It evaluates client-side conditions and controls whether a step, block, or element is displayed, editable, or required. Using an Integration Procedure would add unnecessary server-side processing because the required VIP value is already available in the OmniScript.
A Data Mapper Transform is also unnecessary because there is no structural transformation requirement.
Creating a new version may be part of the deployment process, but it is not the functional configuration that controls visibility. The best implementation is to place the special offers section in the script and configure Conditional View logic against the VIP member value.
NEW QUESTION # 38
What two advantages does a DataRaptor Turbo Extract have over a standard DataRaptor Extract? Choose 2 answers
- A. It has better performance at runtime
- B. It supports complex field mappings
- C. It populates data in PDF and DocuSign format
- D. It is easier to configure
Answer: A,B
NEW QUESTION # 39
A developer examines data received from an external data source. The data is nested two levels down in the JSON structure.
Which OmniStudio tool could the developer use to simplify this data?
- A. An HTTP Action Element
- B. An integration Procedure
- C. A DataRaptor Transform
- D. A guided workflow
Answer: C
Explanation:
A DataRaptor Transform can simplify nested data by transforming it into a flat structure. The developer can use JSON paths to map the input data to the output data and define the output structure.
NEW QUESTION # 40
A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However, ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.
- A. Both parent and embedded OmniScripts have the same element name for the Set Values element.
- B. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- C. A developer failed to includea Navigate Action Element to pass data from the parent OmniScript.
- D. The flag passData.JSON in the parent OmniScript in not configured correctly.
Answer: B
Explanation:
The LWC PubSub Message flag in the Set Values action of the parent OmniScript enables the parent OmniScript to send data to the embedded OmniScript using a custom event. If this flag is not set, the data will not be passed to the embedded OmniScript
NEW QUESTION # 41 
A)
B)
- A. Option A
- B. Option B
Answer: A
NEW QUESTION # 42
A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with actions to close the case and update the case, and it will be styled using the Community's theme.
What must the developer do to configure the FlexCard for deployment in acommunity?
- A. Configure the Component Visibility in the Custom Component
- B. Set the Target property in Publish Options to "CommunityPage"
- C. Set the Deployment property in Card Configuration to "Community"
- D. Add the FlexCard's API name to the FlexCard Player component
Answer: D
Explanation:
Explanation
The FlexCard Player component is used to display FlexCards in a community page. The developer needs to add the FlexCard's API name to the FlexCard Player component to configure the FlexCard for deployment in a community.
NEW QUESTION # 43
A developer needs to create a list of cases for an account in a single Datable in a FlexCard. Like the one shown below.
How can the developer configure the FlexCard to display the case records in this way?
- A. Enable the record Looping feature on the data table elements
- B. Disable the Repeat Record feature on the FlexCard setup tab
- C. Select the Repeatable Mode property on the data table elements
- D. Enable the Repeat Records feature on the FlexCard Setup tab
Answer: C
Explanation:
The Repeatable Mode property on the data table elements allows the developer to display multiple records in a single data table. The Repeat Records feature on the FlexCard Setup tab is used to display multiple FlexCards for each record in a data source. The Record Looping feature on the data table elements is used to iterate over a list of records and perform actions on each record. The Overwrite Target for all Null input checkbox on the Account id field is used to overwrite the existing value in the target object with null if the input value is null.
NEW QUESTION # 44
A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with actions to close the case and update the case, and it will be styled using the Community's theme.
What must the developer do to configure the FlexCard for deployment in a Community?
- A. Add the FlexCard's API name to the FlexCard Player component
- B. Configure the Component Visibility in the Custom Component
- C. Set the Target property in Publish Options to "CommunityPage"
- D. Set the Deployment property in Card Configuration to "Community"
Answer: C
NEW QUESTION # 45
A developerneedsto configure a calculation procedure to calculation a subtotal using two different depending on whether the input Boolean variable is Customer is set to true or false.
How should a developer configurethe calculationprocedure to conditionally execute the correct formula?
- A. Use two separate Calculation Steps with the Conditional Step property selected: compare theisCustomer variable directly to the literal true and false values in the Condition syntax.
- B. Use two separate Calculation Steps with the Conditional Step property selected: use theISTRUE (is Customer) and NOT (ISTRUE) (is Customer) functions in the Condition syntax.
- C. Use two separate Calculation Steps with the Conditional Step property selected: reference just theis Customervariable in the Conditional syntax (no comparison necessary)
- D. Use a single Calculation Steps with IF statement directly in the formula definition to reference the isCustomervariable and conditionally perform theappropriate calculation.
Answer: B
Explanation:
Explanation
Using two separate Calculation Steps with the Conditional Step property selected allows the developer to specify different formulas based on different conditions. The ISTRUE(isCustomer) and NOT(ISTRUE(isCustomer)) functions are used to evaluate the Boolean variable in the Condition syntax. The other options are either missing the Conditional Step property, using incorrect comparison operators, or using an IF statement instead of separate Calculation Steps.
NEW QUESTION # 46
A developer creates an OmniScript to update billing information. After analyzing the different types of customer interactions that occur at the company, the developer determines updating billing information should be included in the majority of customer interactions.
What should the developer use to configure the action that invokes the OmniScript?
- A. OmniScript Action
- B. Custom Action
- C. Lightning Action
Answer: A
Explanation:
From OmniStudio Best Practices for Modular Script Design, OmniScript Actions are the preferred mechanism to invoke another OmniScript within a parent OmniScript. This approach enables reusability and modularization, especially when a function (like updating billing information) is common across many interactions.
* A. OmniScript Action - This is the correct and standard method for embedding or launching one OmniScript from another. It allows developers to reuse common scripts without duplicating logic.
Incorrect Options:
* B. Custom Action requires custom Apex or LWC development, which is unnecessary for this use case.
* C. Lightning Action is typically used to invoke OmniScripts from Lightning pages, not within OmniScripts themselves.
:
OmniStudio Developer Guide # OmniScript Actions
NEW QUESTION # 47
A developer creates a Flexcard that displays a contact's mailing address and passes the contact's postal code to a child FlexCard.
When configuration text elements in the child FlexCard, what syntax should a developer use to refer to the contact's postal code?
- A. {Params.postalcode}
- B. {Postalcode}
- C. {Records.postalcode}
- D. {Parent.postalcode}
Answer: D
NEW QUESTION # 48
An OmniStudio Developer has enabled multi-language support on an OmniScript. The developer has created a set of custom translations for the OmniScript ' s labels. When the script runs, which language setting determines which translation bundle is displayed to the user?
- A. The language selected in a global Session Variable.
- B. The language of the web browser.
- C. The default language of the OmniScript.
- D. The language set in the user ' s Salesforce Settings.
Answer: D
Explanation:
Multi-language OmniScripts use Salesforce translation infrastructure and custom labels. In normal Salesforce runtime usage, the language shown to the user is driven by the user's Salesforce language setting, not simply by the browser language or by a random session variable. The default OmniScript language is only the fallback/base design language; it does not decide which translated bundle is displayed for each user when translations exist. Option A is wrong because a global Session Variable is not the standard translation selector.
Option B is also wrong in this context because OmniScript translations are tied to Salesforce language and Translation Workbench/custom-label behavior. Therefore, the user's Salesforce language setting is the correct controlling source for displayed translations.
NEW QUESTION # 49
......
Salesforce OmniStudio-Developer Test Engine PDF - All Free Dumps: https://www.pass4guide.com/OmniStudio-Developer-exam-guide-torrent.html
Get New OmniStudio-Developer Certification – Valid Exam Dumps Questions: https://drive.google.com/open?id=18NQo8fSMiGa88UqBafeyH10e6jBNiQHu