[Dec 13, 2021] Pass4guide NACE-CIP2-001 dumps & CIP Level 2 sure practice dumps
NACE NACE-CIP2-001 Actual Questions and Braindumps
NEW QUESTION 12
In the event of a conflict between the Product Data Sheet and the Specification:
- A. It is up to the Applicator to decide which one to follow
- B. The Product Data Sheet prevails
- C. It is up to the Inspector to decide which one to follow
- D. The Specification prevails
Answer: D
NEW QUESTION 13
Eddy current DFT gauges are used to measure Dry Film Thickness in which of the following situations:
- A. Non-Conductive coatings applied to a conductive metallic substrate
- B. Magnetic coatings applied to a magnetic metallic substrate
- C. Conductive coatings applied to a magnetic metallic substrate
- D. Conductive coatings applied to a cementitious substrate
Answer: A
NEW QUESTION 14
You are the NACE Level 2 Inspector with the final responsibility to prepare the final report for a very large structural steel shop project which has gone very well. It is due next week. The work has been ongoing for two years and several NACE Level 1 Inspectors have worked under your supervision throughout the project. You find you are missing one week of daily reports for the night shift from the very beginning of the project and despite your best efforts they are cannot found.
You FIRST preferred course of action is to:
- A. Re-create the reports as not much was going on during night shift anyway
- B. Plainly state in your report that they are missing
- C. Use creative writing to cover over the fact they are missing
- D. Do not complete your report until they can be found
Answer: B
NEW QUESTION 15
Coating surveys may include which steps?
Select All That Apply:
- A. Summarize the collected data
- B. Evaluate the coatings performance
- C. Schedule the remedial work
- D. Develop a survey plan
Answer: A,B,C,D
NEW QUESTION 16
The main reason dehumidification is used during coating operations is to
- A. control the environment
- B. reduce the possibility of missing the recoat window.
- C. avoid repetitive blasting/coating operations.
- D. allow the contractor to guarantee the completion date.
Answer: A
NEW QUESTION 17
You can use magnifiers to examine all of the following EXCEPT
- A. Blisters
- B. Surface cleanliness
- C. Mill scale
- D. Surface profile
Answer: B
NEW QUESTION 18
Differences in technique for abrasive blasting concrete versus steel require the operator to:
- A. a), b) and c)
- B. Lower the blast pressure
- C. Increase the standoff distance
- D. Move the nozzle quicker
Answer: A
NEW QUESTION 19
You should bulk store coatings containing isocyanates
- A. in a refrigerated warehouses
- B. in a well ventilated area separate from the work place.
- C. in a heated warehouse.
- D. wherever it is convenient
Answer: B
NEW QUESTION 20
Examples of non-ferrous metals include
Select All that Apply:
- A. copper
- B. mild steel.
- C. iron
- D. aluminum
Answer: A,D
NEW QUESTION 21
Thermal Spray coatings provide:
- A. Barrier protection
- B. Inhibitive protection
- C. Sacrificial protection
- D. Thermal protection
Answer: C
NEW QUESTION 22
You are the NACE Level 2 inspector reviewing the documentation from a NACE Level 1 you notice significant documentation errors.
Your FIRST preferred course of action is to:
- A. Have the Level 1 Inspector correct the errors and set up remedial training to improve the quality of documentation
- B. Correct the errors yourself and submit the reports without any further action
- C. Correct the errors yourself and advise your supervisor that the Level 1 Inspector is incompetent
- D. Correct the errors yourself and suggest the Level 1 inspector be replaced
Answer: A
NEW QUESTION 23
You are working as the only in-house NACE Level 2 Inspector in a shop setting when an independent 3 rd party NACE Level 3 Inspector, representing the owner, presents you with a copy of a Non Conformance Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast which you had previously approved.
Your FIRST preferred course of action is to:
- A. Consult your supervisor
- B. Request a re-blast of the item in question
- C. Verbally challenge the NCR
- D. Review the NCR with the other Inspector
Answer: A
NEW QUESTION 24
NACE International Standards are developed by:
- A. International mandates
- B. Government mandates
- C. Standard committees
- D. Regional mandates
Answer: C
NEW QUESTION 25
The primary purpose of Fireproofing coatings are to provide:
- A. Temporary protection for the structure
- B. fire extinguishing characteristics
- C. Preferential fuel for the fire
- D. Explosion resistance
Answer: A
NEW QUESTION 26
The best choice of instrument for holiday testing of thick film concrete coatings is:
- A. High Voltage AC
- B. High Voltage DC Pulse Type
- C. Low Voltage Sponge Type
- D. High Voltage DC Constant Current
Answer: D
NEW QUESTION 27
When observing design defects the NACE Inspector should:
- A. Document the defect and the potential problems that could result
- B. Stop the job immediately
- C. Ignore the defect as the inspector can't change the design
- D. Request that the item be rebuilt with a better design for coating
Answer: A
NEW QUESTION 28
When completing the Final Inspection report the Inspector should write the report using:
- A. Language that another NACE Inspector would understand
- B. Language that only in the project would understand
- C. Language that only technical experts would understand
- D. Language that the most would understand
Answer: D
NEW QUESTION 29
......
Latest NACE-CIP2-001 Pass Guaranteed Exam Dumps with Accurate & Updated Questions: https://www.pass4guide.com/NACE-CIP2-001-exam-guide-torrent.html
Pass NACE-CIP2-001 Exam with Updated NACE-CIP2-001 Exam Dumps PDF 2021: https://drive.google.com/open?id=1wyzjQQ5OAq-BKCIr03_Y-DwU--43n6YV