Get instant access to HPE6-A66 Practice Tests 2021 Free Updated Today!
Welcome to download the newest PassLeader HPE6-A66 PDF dumps ( 60 Q&As)
NEW QUESTION 15
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards. What type of survey should the network architect perform?
- A. Active
- B. Virtual
- C. Spectrum clearing
- D. Passive
Answer: A
NEW QUESTION 16
A network architect is designing a new Wi-Fi solution for a small university The solution will involve two mobility controllers that will be clustered at the campus core Because students use a lot of video in both the dormitory rooms and in the classrooms, the solution will need to support 50Gbps via link aggregation between the controllers and core switches.
Which solution would most cost-effectively meet this requirement for the campus core?
- A. Aruba 7280 mobility controllers and 5406R switches
- B. Aruba 7220 mobility controllers and 3810M switches
- C. Aruba 7210 mobility controllers and 5406R switches
- D. Aruba 7240XM mobility controllers and 3810M switches
Answer: B
NEW QUESTION 17
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- A. implementing adequate security measures to ensure PCI compliance
- B. providing consistent performance on all available channels
- C. roaming between APs
- D. encountering RF interference by devices
- E. determining the RF channel bandwidth consumed per Barcode scanner
Answer: A,B
NEW QUESTION 18
A network architect imports a floorplan defined in a PNG file format What is the function of the measurement tool in Aruba's VisualRF?
- A. Define the appropriate dimensions of each room in a Floorplan View
- B. Define the appropriate dimensions of a Floorplan and Building View
- C. Define the appropriate dimensions of a Floorplan View
- D. Define the appropriate dimensions of each object in a Floorplan View
Answer: D
NEW QUESTION 19
A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?
- A. S02.11h
- B. S02.11V
- C. 802.11 ax
- D. 802.11r
Answer: C
NEW QUESTION 20
A network architect is designing a new wireless solution for a company The company needs seamless roaming and client and AP active load balancing. The company also requires an Aruba Mobility Master (MM) to manage the wireless infrastructure. Which Aruba feature does the architect need to include in the design?
- A. Client Match
- B. IAP VC
- C. Clustering
- D. AirMatch
Answer: C
NEW QUESTION 21
A company has two buildings on a campus, where each building has three floors, which two wiring closets per floor Assume that there will be 24 APs connected via POE+ to each wiring closet, along with 128 wired user connections. Which backplane stacking solution will provide the necessary Ethernet port capacity for all devices on Building 1 Floor 2 and is fully meshed?
- A. One 2930M 24-port POE+ switch and two 2930M 48-port switches per wiring closet
- B. One 381 OM 24-port POE+ switches and two 2930M 48-port switches per wiring closet
- C. Two 381 OM 24-port POE+ switches and three 381OM 48-port switches per wiring closet
- D. Two 2930F 24-port POE+ switches and three 2930F 48-port switches per wiring closet
Answer: A
NEW QUESTION 22
A network architect needs to design a new wireless solution for a small company The architect estimates that about 150 APs will be required to implement a capacity design. Roaming support is required. Also, the design requires meshing to connect some of the APs to the network.
The customer requires that client state synchronization be provided for real-time failover.
Which solution would most cost-effectively meet these requirements?
- A. Two 7205 mobility controller and campus APs in a cluster
- B. lAPs in a cluster
- C. FRAPs in a cluster
- D. Two 7030 mobility controller and campus APs in a cluster
Answer: C
NEW QUESTION 23
A network designer is documenting the number of physical sites for a customer that is within the scope of a redesign project. When determining the network purpose at each site, on what should the designer focus at each site? (Select two.)
- A. number of users
- B. ceiling height
- C. square footage
- D. number of buildings
- E. types of users and their devices
Answer: B,C
NEW QUESTION 24
A network architect plans to implement channel bonding in a new wireless design that involves dense deployment of APs. Which channel width would be optimal for this design?
- A. 40 MHZ
- B. 20 MHz
- C. 60 MHZ
- D. 10MHZ
Answer: C
NEW QUESTION 25
Which type of Aruba AP uses its radio as its back-haul connection?
- A. Remote AP (RAP)
- B. Air Monitor (AM)
- C. Mesh Porta
- D. Mesh Point
Answer: C
NEW QUESTION 26
A network architect is doing a site survey for a new wireless design One concern the company has with the old wireless network is coverage. In some cases, APs would lose power and some employees in the network would lose wireless connectivity. The new design needs to prevent this issue from occurring. During the site survey, what are best practices to be followed in regards to the dBm signal level and the power of the AP to ensure adequate wireless coverage and minimal overlap of AP signals for the new design?
- A. AP power at 50% and a measurement of -65 dBM on the measuring device
- B. AP power at 75% and a measurement of -90 dBM on the measuring device
- C. AP power at 75% and a measurement of -80 dBM on the measuring device
- D. AP power at 100% and a measurement of -65 dBM on the measuring device
Answer: D
NEW QUESTION 27
A network architect is designing a new Wi-Fi solution for a customer The customer currently occupies a one-story building on a small campus. In one part of the building there is an auditorium, where the ceiling height and attenuation is different from the rest of the building. What should the network architect create in VisualRF to identify this difference when planning :ne APs?
- A. Define the appropriate properties in the Building View
- B. Spit the Building View into two Floorplan Views
- C. Create a Region in the Floorplan View
- D. Define the appropriate properties in the Network View
Answer: A
NEW QUESTION 28
When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?
- A. number of users per location
- B. mobility requirements and usage
- C. type of users
- D. density of users
Answer: B
NEW QUESTION 29
A network architect is replacing an old wireless implementation based on 802.11 a with a new wireless solution. The company has a lot of money invested in legacy wireless barcode scanners and will not be replacing them. However, the bandwidth that the company expects each AP to have less than 700 Mbps in bandwidth, and this is not expected to change in the future.
Which wireless solution would best meet this company's needs and be the most cost-effective?
- A. 802.11g
- B. 802.11ax
- C. 802.11n
- D. 802.11ac
Answer: B
NEW QUESTION 30
......
Sep-2021 Latest Pass4guide HPE6-A66 Exam Dumps with PDF and Exam Engine: https://www.pass4guide.com/HPE6-A66-exam-guide-torrent.html