Oct 10, 2024 PASS Cisco 300-730 EXAM WITH UPDATED DUMPS
300-730 Questions PDF [2024] Use Valid New dump to Clear Exam
Cisco 300-730 certification exam is a 90-minute exam that consists of 60-70 questions. 300-730 exam is available in English and Japanese and can be taken at any Pearson VUE testing center worldwide. Candidates who pass the exam will receive the Cisco Certified Specialist - Security Implementing Secure Solutions with Virtual Private Networks certification, which is a valuable credential in the IT industry and demonstrates the candidate's expertise in implementing secure VPN solutions.
NEW QUESTION # 111
Drag and drop the correct commands from the night onto the blanks within the code on the left to implement a design that allow for dynamic spoke-to-spoke communication. Not all comments are used.
Answer:
Explanation:
NEW QUESTION # 112
Refer to the exhibit. The customer can establish a Cisco AnyConnect connection without using an XML profile. When the host "ikev2" is selected in the AnyConnect drop down, the connection fails.
What is the cause of this issue?
- A. Primary protocol should be SSL.
- B. The HostName is incorrect.
- C. The IP address is incorrect.
- D. UserGroup must match connection profile.
Answer: D
Explanation:
https://community.cisco.com/t5/security-documents/anyconnect-xml-settings/ta-p/3157891
NEW QUESTION # 113
Refer to the exhibit.
Which VPN technology is used in the exhibit?
- A. GRE
- B. DVTI
- C. DMVPN
- D. VTI
Answer: D
NEW QUESTION # 114
Which feature allows the ASA to handle nonstandard applications and web resources so that they display correctly over a clientless SSL VPN connection?
- A. WebType ACL
- B. single sign-on
- C. Smart Tunnel
- D. plug-ins
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/asa/asa90/configuration/guide/asa_90_cli_config/ vpn_clientless_ssl.html#29951
NEW QUESTION # 115
A network engineer must configure the Cisco ASA so that Cisco AnyConnect clients establishing an SSL VPN connection create an additional tunnel for real-time traffic that is sensitive to packet delays. If this additional tunnel experiences any issues, it must fall back to a TLS connection.
Which two Cisco AnyConnect features must be configured to accomplish this task? (Choose two.)
- A. SSL Rekey
- B. OMTU
- C. DSCP Preservation
- D. DTLS
- E. DPD
Answer: D,E
Explanation:
Configure Dead Peer Detection Dead Peer Detection (DPD) ensures that the ASA (gateway) or the client can quickly detect a condition where the peer is not responding, and the connection has failed. To enable dead peer detection (DPD) and set the frequency with which either the AnyConnect client or the ASA gateway performs DPD, do the following: Before you begin This feature applies to connectivity between the ASA gateway and the AnyConnect SSL VPN Client only. It does not work with IPsec since DPD is based on the standards implementation that does not allow padding, and CLientless SSL VPN is not supported. If you enable DTLS, enable Dead Peer Detection (DPD) also. DPD enables a failed DTLS connection to fallback to TLS. Otherwise, the connection terminates.
https://www.cisco.com/c/en/us/td/docs/security/asa/asa96/configuration/vpn/asa-96-vpn- config/vpn-anyconnect.html
NEW QUESTION # 116
Refer to the exhibit.
A user is connecting from behind a PC with a private IP Address. Their ISP provider is blocking TCP port 443. Which AnyConnect XML configuration will allow the user to establish a connection with the ASA?
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: A
NEW QUESTION # 117
Refer to the exhibit. Upon setting up a tunnel between two sites, users are complaining that connections to applications over the VPN are not working consistently. The output of show crypto ipsec sa was collected on one of the VPN devices. Based on this output, what should be done to fix this issue?
- A. Lower the tunnel MTU.
- B. Enable perfect forward secrecy.
- C. Make an adjustment to IPSec replay window.
- D. Specify the application networks in the remote identity.
Answer: C
Explanation:
https://community.cisco.com/t5/vpn/ipsec-anti-replay-errors-on-1-gig-vpn-tunnel/td-p/4524103
NEW QUESTION # 118
A user at a company HQ is having trouble accessing a network share at a branch site that is connected with a L2L IPsec VPN. While troubleshooting, a network security engineer runs a packet tracer on the Cisco ASA to simulate the user traffic and discovers that the encryption counter is increasing but the decryption counter is not. What must be configured to correct this issue?
- A. Adjust the peer IP address on the remote peer to direct traffic back to the ASA.
- B. Adjust the preshared key on the remote peer to allow traffic to flow over the tunnel.
- C. Adjust the transform set to allow bidirectional traffic.
- D. Adjust the routing on the remote peer device to direct traffic back over the tunnel.
Answer: D
NEW QUESTION # 119
Refer to the exhibit.
The network administrator must allow the Cisco AnyConnect Secure Mobility Client to securely access the corporate resources via IKEv2 and print locally. Traffic that is destined for the Internet must still be tunneled to the Cisco ASA. Which configuration does the administrator use to accomplish this goal?
- A. Split exclude policy with a deny for 192.168.0.3/32.
- B. Split exclude policy with a permit for 0.0.0.0/32.
- C. Split include policy with a permit for 192.168.0.0/24.
- D. Tunnel all policy.
Answer: B
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/70847-local-lan-pix-asa.html
NEW QUESTION # 120 
Refer to the exhibit. The DMVPN tunnel is dropping randomly and no tunnel protection is configured. Which spoke configuration mitigates tunnel drops?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
Section: Site-to-site Virtual Private Networks on Routers and Firewalls
NEW QUESTION # 121
Refer to the exhibit. A TCP based application that should be accessible over the VPN tunnel is not working. Pings to the appropriate IP address are failing. Based on the output, what is a fix for this issue?
- A. Add a permit for TCP traffic going to 10.1.1.0/24.
- B. Add a permit for TCP traffic going to 209.165.201.0/27.
- C. Add a route on the remote peer for 209.165.201.0/27.
- D. Add a route on the local peer for 10.1.1.0/24.
Answer: C
NEW QUESTION # 122
Refer to the exhibit. VPN tunnels between a spoke and two DMVPN hubs are not coming up. The network administrator has verified that the encryption, hashing, and DH group proposals for Phase 1 and Phase 2 match on both ends. What is the solution to this issue?
- A. Ensure bidirectional UDP 500/4500 traffic.
- B. Add NAT statements for VPN traffic.
- C. Enable shared tunnel protection.
- D. Increase the isakmp phase 1 lifetime.
Answer: A
NEW QUESTION # 123
Refer to the exhibit.
The customer can establish a Cisco AnyConnect connection without using an XML profile. When the host "ikev2" is selected in the AnyConnect drop down, the connection fails. What is the cause of this issue?
- A. Primary protocol should be SSL.
- B. The HostName is incorrect.
- C. The IP address is incorrect.
- D. UserGroup must match connection profile.
Answer: D
Explanation:
Reference:
User Group-Specify a user group. The user group is used in conjunction with Host Address to form a group-based URL. If you specify the Primary Protocol as IPsec, the User Group must be the exact name of the connection profile (tunnel group). For SSL, the user group is the group-url of the connection profile.
NEW QUESTION # 124
A network engineer is configuring a server. The router will terminate encrypted VPN connections on g0/0, which is in the VRF "Internet". The clear-text traffic that must be encrypted before being sent out traverses g0/1, which is in the VRF "Internal". Which two VRF-specific configurations allow VPN traffic to traverse the VRF-aware interfaces? (Choose two.)
- A. Under the virtual-template interface, add the ip vrf forwarding Internet command.
- B. Under the virtual-template interface, add the tunnel vrf Internet command.
- C. Under the IKEv2 profile, add the match fvrf Internet command.
- D. Under the IKEv2 profile, add the ivrf Internal command.
- E. Under the IKEv2 profile, add the match fvrf Internal command.
Answer: B,C
Explanation:
https://www.cisco.com/c/en/us/support/docs/security/flexvpn/116000-flexvpn-config-00.html crypto ikev2 profile CProfile match fvrf internet // ("out vrf")
...
virtual-template 1
...
interface virtual-template 1 type tunnel
vrf forwarding internal // (internal vrf)
...
tunnel vrf internet // (out vrf)
NEW QUESTION # 125
When deploying a site-to-site VPN, what must be used to minimize IP fragmentation?
- A. Path MTU Discovery
- B. IKE version 1
- C. ISAKMP over UDP 500
- D. Dead Peer Detection
Answer: A
NEW QUESTION # 126
Which feature of GETVPN is a limitation of DMVPN and FlexVPN?
- A. no requirement for an overlay routing protocol
- B. sequence numbers that enable scalable replay checking
- C. design for use over public or private WAN
- D. enabled use of ESP or AH
Answer: A
Explanation:
Section: Secure Communications Architectures
NEW QUESTION # 127
A network engineer must implement an SSLVPN Cisco AnyConnect solution that supports 500 concurrent users, ensures all traffic from the client passes through the ASA, and allows users to access all devices on the inside interface subnet (192.168.0.0/24). Assuming all other configuration is set up appropriately, which configuration implements this solution?
- A.
- B.
- C.
- D.
Answer: A
Explanation:
First, tunnel all to ensure all traffic is passing through ASA (so answer is A or D). second, we need 500 users so the Pool in D is not ensuring this requirement (only 254 ip) so Answer is A.
NEW QUESTION # 128
......
The Cisco 300-730 SVPN exam is essential for earning the CCNP Security certification. This test checks the entrant's knowledge of various concepts of communication and networks.
300-730 Study Guide Brilliant 300-730 Exam Dumps PDF: https://www.pass4guide.com/300-730-exam-guide-torrent.html
Passing Cisco 300-730 Exam Using 2024 Practice Tests: https://drive.google.com/open?id=14hnKn7fAHibFVyyRL1CSdTi1teF49IKw