[Oct-2021] Aruba Certified Switching Associate (ACSA) V1 HPE6-A72 Exam Practice Dumps [Q33-Q55]

Share

[Oct-2021] Aruba Certified Switching Associate (ACSA) V1 HPE6-A72 Exam Practice Dumps

2021 HPE6-A72 Premium Files Test pdf - Free Dumps Collection

NEW QUESTION 33
Place the OSI Layers in the correct order. Arrange them from least to greatest, starting with Layer 1 on the top, and progressing to Layer 7 on the bottom.

Answer:

Explanation:

1 - physical Layer
2 - Data Link Layer
3 - Network Layer
4 - Transport Layer
5 - Session Layer
6 - Presentation Layer
7 - Application Layer

 

NEW QUESTION 34
Refer to the exhibit.

What VSF command produces the above output?

  • A. show vsf member
  • B. show vsf detail
  • C. show vsf link
  • D. show vsf topology

Answer: D

 

NEW QUESTION 35
Match the terms to the correct layer of the OSI model.

Answer:

Explanation:

 

NEW QUESTION 36
Which statement is correct regarding powering an Aruba Access Point?

  • A. Using switchports for this reason is unnecessary, because Aruba Access Points typically use an AC to DC power adapter to draw power.
  • B. Most administrators use PoE or PoE+ enabled switchports to provide both Ethernet connectivity and power to the AP.
  • C. PoE or PoE+ is only used with Ethernet that is carried over multi-mode fiber cabling.
  • D. PoE or PoE+ enabled switchports are rarely used given concerns about causing electrical interference, with the data also carried over Ethernet cabling.

Answer: B

 

NEW QUESTION 37
What are the commands to disable SSH and HTTPS services from the default VRF?

  • A. Core-1(config)# no ssh server enable
    Core-1(config)# no https-server enable
  • B. Core-1# no ssh server vrf default
    Core-1# no https-server vrf default
  • C. Core-1(config)# no ssh server vrf default
    Core-1(config)# no https-server vrf default
  • D. Core-1(config)# no ssh server
    Core-1(config)# no https-server

Answer: C

 

NEW QUESTION 38
Refer to the exhibit.

The above scenario shows a packet from the Server destined for the Firewall. Switch-A and Switch-B are bundled as VSF stack. The LAG between the VSF stack and the firewall indicates a hash function to forward the packet on port 2/1/2.
Which statement is true regarding how Switch-A will forward the packet?

  • A. Switch-A will encapsulate the packet using GRE to forward to Switch-B in order for the packet to egress on port 2/1/2 per the hash function.
  • B. Switch-A will forward the packet along the VSF link to Switch-B so that it will egress on port 2/1/2 per the hash function.
  • C. Switch-A will drop the packet. Multi-Chassis lag to multi-chassis lag is not a supported feature of VSF.
  • D. Switch-A will forward the packet on port 1/1/2. VSF will override the typical LAG hash function used for the physical interface selection.

Answer: B

 

NEW QUESTION 39
Match the available stacking feature to the correct AOS-CX switch model. Stacking features may be used more than once.

Answer:

Explanation:

 

NEW QUESTION 40
Interface 1/1/1 is up
Admin state is up
Link transitions: 1
Description: TO_PC-1
Hardware: Ethernet, MAC Address: 00:11:22:33:44:55
MTU 1500
Type 1GbT
Full-duplex
qos trust none
Speed 1000 Mb/s
Auto-negotiation is on
Flow-control: off
Error-control: off
MDI mode: MDIX
VLAN Mode: access
Access VLAN: 1111
Which command will produce the above output?

  • A. show interface gigabit 1/1/1
  • B. show vlan 1111
  • C. show interface vlan 1111
  • D. show interface 1/1/1

Answer: D

 

NEW QUESTION 41
Which two options are the Layer 2 protocols? (Choose two.)

  • A. STP
  • B. 802.11af
  • C. IPSec
  • D. RIP
  • E. 802.1Q

Answer: A,E

 

NEW QUESTION 42
Refer to the exhibit.

Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.
Which configuration will correct the issue?

  • A. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.1
  • B. Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181
  • C. Host-B: assign the default-gateway address 10.1.20.181
  • D. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181

Answer: D

 

NEW QUESTION 43
Refer to the exhibit.

Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface?

  • A. 01001011
  • B. 0
  • C. 1
  • D. 2

Answer: B

 

NEW QUESTION 44
Refer to the exhibit.

Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.
Which configuration will correct the issue?

  • A. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN
    Host-B: assign the default-gateway address 10.1.20.1
  • B. Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN
    Host-B: assign the default-gateway address 10.1.20.181
  • C. Host-B: assign the default-gateway address 10.1.20.181
  • D. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN
    Host-B: assign the default-gateway address 10.1.20.181

Answer: D

 

NEW QUESTION 45
Core# configure terminal
Core(config)# vrf Green
Core(config-vrf)# exit
Core(config)#
Core(config)# interface vlan 50
Core(config-if-vlan)# ?
Given the configuration on the CORE switch shown above, what command would follow to assign the switched virtual interface (SVI) vlan 50 to the VRF created?

  • A. Core(config-if-vlan)# ip vpn-instance Green
  • B. Core(config-if-vlan)# ip vrf forwarding Green
  • C. Core(config-if-vlan)# vrf attach Green
  • D. Core(config-if-vlan)# routing-context Green vrf

Answer: C

 

NEW QUESTION 46
What is true about VSX? (Choose two.)

  • A. VSX is ideal for Campus access layer deployments where ease of deployment is needed.
  • B. VSX is available on all Aruba OS-CX switches except the 6300F model.
  • C. VSX run separate control planes to reduce latency and improve performance.
  • D. VSX is implemented on static port switches. VSX-plus needed to stack chassis together.
  • E. VSX allows upgrading members with near zero downtime or loss of packets.

Answer: C,E

 

NEW QUESTION 47
Match each network protocol to the correct server listening port. Not all answers will be used.

Answer:

Explanation:

 

NEW QUESTION 48
Which two options are correct regarding the IEEE 802.11ax standard? (Choose two.)

  • A. operates only in the 5GHz similar to 802.11ac
  • B. is the first WLAN standard to no longer use electromagnetic signals to transmit data
  • C. is an emerging satellite connection standard to allow wireless access anywhere in the world
  • D. allows transmissions of up to 4.8Gbps
  • E. operates in both the 2.4GHz and 5GHz radios bands

Answer: D,E

 

NEW QUESTION 49
Refer to the exhibit.

What is the correct binary conversion of the last two hexadecimal characters of the physical address?

  • A. 1001 1111 0101 0011
  • B. 1101 1000
  • C. 1110 1101
  • D. 1000 1101 1110 1101

Answer: C

 

NEW QUESTION 50
The section in blue can be ignored.
SW1(config)# interface 1/1/1-1/1/2
SW1(config-if-<1/1/1-1/1/2)# vlan access 2
SW1(config-if-<1/1/1-1/1/2)# exit
SW1(config)# interface 1/1/11-1/1/17
SW1(config-if-<1/1/11-1/1/17)# vlan access 17
SW1(config-if-<1/1/11-1/1/17)# exit
After completing the above commands, what is the expected output of show vlan with no other vlan commanded having been added?

  • A. Option A
  • B. Option D
  • C. Option B
  • D. Option C

Answer: B

 

NEW QUESTION 51
Aruba Access Points tunnel traffic in a campus to the Mobility Controller using which protocol?

  • A. Lightweight Access Point Protocol (LWAPP)
  • B. Process Application Programming Interface (PAPI)
  • C. Generic Routing Encapsulation (GRE)
  • D. Control and Provisioning of Wireless Access Points (CAPWAP)

Answer: C

 

NEW QUESTION 52
Which command can be used to find the serial number of an Aruba OS-CX switch?

  • A. The command version
  • B. The command show system
  • C. The command show running-configuration
  • D. The command inventory

Answer: B

Explanation:
Explanation/Reference:

 

NEW QUESTION 53
Which two commands will save the running-config so that changes will be loaded automatically on the next reboot? (Choose two.)

  • A. save
  • B. write memory
  • C. copy running-config checkpoint boot-config
  • D. copy config config1 config startup-config
  • E. copy running-config startup-config

Answer: B,E

 

NEW QUESTION 54
Review the exhibit.
As the frame traverses from **PC-1** to **Server-1**, the VLAN tag will be removed.
Click on the interface (circled in green) where the VLAN tag will be removed.

Answer:

Explanation:

 

NEW QUESTION 55
......

Get ready to pass the HPE6-A72 Exam right now using our Aruba Certified Switching Associate (ACSA) V1  Exam Package: https://www.pass4guide.com/HPE6-A72-exam-guide-torrent.html

A fully updated 2021 HPE6-A72 Exam Dumps exam guide from training expert Pass4guide: https://drive.google.com/open?id=1uCJU5PE0N7kSScuQahvbuBbTG-ubAYMu