[Dec 07, 2021] Latest 1Z0-997-20 Exam with Accurate Oracle Cloud Infrastructure 2020 Architect Professional PDF Questions
Practice To 1Z0-997-20 - Pass4guide Remarkable Practice On your Oracle Cloud Infrastructure 2020 Architect Professional Exam
NEW QUESTION 43
You have deployed a web application targeting a global audience across multiple Oracle Cloud Infrastructure (OCI) regions.
You decide to use Traffic Management Geo-Location based Steering Policy to serve web requests to users from the region closets to the user. Within each region you have deployed a public load balancer with 4 servers in a backend set. During a DR test disable all web servers in one of the regions however, traffic Management does not automatically direct all users to the other region.
Which two are possible causes?
- A. You did not setup an HTTP Health Check associated with Load Balancer public IP in the disabled region.
- B. You did not correctly setup the Load Balancer HTTP health check policy associated with backend set
- C. You did not setup a Route Table associated with load Balancer's subnet
- D. One of the two working web servers In the other region did not pass Its HTTP health check
- E. Rather than using Geo-Location based Steering Policy, you should use Failover Policy Type to serve traffic.
Answer: A,B
NEW QUESTION 44
You have multiple IAM users who launch different types of compute Instances and block volumes every day. As a result, your Oracle cloud Infrastructure (OCF) tenancy quickly hit the service limit and you can no longer create any new instances. As you are cleaning up environment, you notice that the majority of the Instances and block volumes are untagged. Therefore, It is difficult to pinpoint the owner of these resources verify if they are safe to terminate.
Because of this, your company has issued a new mandate, which requires adding compute instances.
Which option is the simplest way to implement this new requirement?
- A. Create a default tag for each compartment, which ensure that appropriate tags are applied at resource creation
- B. Create tag variables to automatically tag a resource with the user name.
- C. Create a policy to automatically tag a resource with the user name.
- D. Create a policy using 1AM requiring users to tag specific resources. This will allow a user to launch compute instances on\y if certain tags were defined.
- E. Create tag variables for each compartment to automatically tag a resource with the user name.
Answer: B
Explanation:
Tag Variables
You can use a variable to set the value of a defined tag. When you add the tag to a resource, the variable resolves to the data it represents. You can use tag variables in defined tags and default tags.
Supported Tag Variables
The following tag variables are supported.
${iam.principal.name} The name of the principal that tagged the resource
${iam.principal.type} The type of principal that tagged the resource.
${oci.datetime} The date and time that the tag was created.
Consider the following example:
Operations.CostCenter=" ${iam.principal.name} at ${oci.datetime} "
Operations is the namespace, CostCenter is the tag key, and the tag value contains two tag variables ${iam.principal.name} and ${oci.datetime} . When you add this tag to a resource, the variable resolves to your user name (the name of the principal that applied the tag) and a time date stamp for when you added the tag.
user_name at 2019-06-18T18:00:57.604Z
The variable is replaced with data at the time you apply the tag. If you later edit the tag, the variable is gone and only the data remains. You can edit the tag value in all the ways you would edit any other tag value. To create a tag variable, you must use a specific format.
${<variable>} Type a dollar sign followed by open and close curly brackets. The tag variable goes between the curly brackets. You can use tag variables with other tag variables and with string values. Tag defaults let you specify tags to be applied automatically to all resources, at the time of creation, in a specific compartment. This feature allows you to ensure that appropriate tags are applied at resource creation without requiring the user who is creating the resource to have access to the tag namespaces.
https://docs.cloud.oracle.com/en-us/iaas/Content/Tagging/Tasks/managingtagdefaults.htm
NEW QUESTION 45
An OCI Architect is working on a solution consisting of analysis of data from clinical trials of a pharmaceutical company. The data is being stored in OCI Autonomous Data Warehouse (ADW) having 8 CPU Cores and 70 TB of storage. The architect is planning to setup autoscaling to respond to dynamic changes in the workload.
Which of the following needs to be considered while configuring auto scaling? Choose two
- A. Auto scaling also scales IO throughput linearly along with CPU
- B. The database memory SGA and PGA will not get affected by the changes in the number of CPUs during auto scaling
- C. Enabling auto scaling does not change the concurrency and parallelism settings
- D. The maximum CPU cores that will be automatically allocated for this database is 16 CPUs
Answer: A,C
Explanation:
Explanation
Auto scaling is enabled by default when you create an Autonomous Database instance or you can use Scale Up/Down on the Oracle Cloud Infrastructure console to enable or disable auto scaling.
With auto scaling enabled the database can use up to three times more CPU and IO resources than specified by the number of OCPUs currently shown in the Scale Up/Down dialog. When auto scaling is enabled, if your workload requires additional CPU and IO resources the database automatically uses the resources without any manual intervention required.
Enabling auto scaling does not change the concurrency and parallelism settings for the predefined services IO throughput depends on the number of CPUs you provision and scales linearly with the number of CPUs.
NEW QUESTION 46
You are advising the database administrator responsible for managing non-production environment for Oracle Autonomous Database running on Oracle Cloud Infrastructure. You need to help the database administrator ensure that the non-production environments have a copy of the current data from the production environment in a manner that is most time-efficient.
Which method should you recommend? (Choose the best answer.)
- A. Take a Data Pump export of the production Autonomous database and import into the non-production database.
- B. Create a metadata clone of the production Autonomous Database and create the non-production database from it.
- C. Create a full clone of the production Autonomous Database and create the non-production database from it.
- D. Take a full database backup of the production Autonomous database and create the non-production database from it.
Answer: C
Explanation:
https://www.oracle.com/database/technologies/datawarehouse-bigdata/adb-faqs.html
NEW QUESTION 47
A retail company has several on-premises data centers which span multiple geographical locations. They plan to move some of their applications from on-premises data centers to Oracle Cloud Infrastructure (OCI). For these applications running in OCI, they still need to interact with applications running on their on-premises data centers to Oracle Cloud Infrastructure (OCI). for these applications running in OCI. they still need to interact with applications running on their on-premises data centers. These applications require highly available, fault-tolerant network connections between on premises data centers and OCI.
Which option should you recommend to provide the highest level of redundancy?
- A. Set up both IPSec VPN and FastConnect to connect your on premises data centers to Oracle Cloud Infrastructure.
- B. If your data centers span multiple, geographical locations, use only the specific IP address as a static route for the specific geographical location
- C. Use FastConnect private peering only to ensure secure access from your data center to Oracle Cloud Infrastructure
- D. Oracle cloud Infrastructure provides network redundancy by default so that no other operations are required
- E. Set up a single IPSec VPN connection (rom your data center to Oracle Cloud Infrastructure since It is cost effective
Answer: B
Explanation:
Explanation
If your data centers span multiple geographical locations, we recommend using a broad CIDR (0.0.0.0/0) as a static route in addition to the CIDR of the specific geographical location. This broad CIDR provides high availability and flexibility to your network design. For instance, the following diagram shows two networks in separate geographical areas that each connect to Oracle Cloud Infrastructure. Each area has a single on-premises router, so two IPSec VPN connections can be created. Note that each IPSec VPN connection has two static routes: one for the CIDR of the particular geographical area, and a broad 0.0.0.0/0 static route.
NEW QUESTION 48
You work for a German company as the Lead Oracle Cloud Infrastructure architect. You have designed a highly scalable architecture for your company's business critical application which uses the Load Balancer service auto which uses the Load Balancer service, autoscaling configuration for the application servers and a 2 Node VM Oracle RAC database. During the peak utilization period of the- application yon notice that the application is running slow and customers are complaining. This is resulting in support tickets being created for API timeouts and negative sentiment from the customer base.
What are two possible reasons for this application slowness?
- A. Autoscaling configuration for the application servers didn't happen due to service limit breach of the VM shapes used by the application servers
- B. The Load Balancer configuration is not sending traffic to the listener of the application servers.
- C. Autoscaling configuration for the application servers didn't happen due to compartment quota breach of the VM shapes used by the application servers.
- D. The Load Balancer doesn't have a Network Security Group to allow traffic to the application servers.
- E. Autoscaling configuration for the application servers didn't happen due to IAM policy that's blocking access to the application server compartment
Answer: A,C
Explanation:
Autoscaling
Autoscaling enables you to automatically adjust the number of Compute instances in an instance pool based on performance metrics such as CPU utilization. This helps you provide consistent performance for your end users during periods of high demand, and helps you reduce your costs during periods of low demand.
Prerequisites
- You have an instance pool. Optionally, you can attach a load balancer to the instance pool. For steps to create an instance pool and attach a load balancer, see Creating an Instance Pool.
- Monitoring is enabled on the instances in the instance pool. For steps to enable monitoring, see Enabling Monitoring for Compute Instances.
- The instance pool supports the maximum number of instances that you want to scale to. This limit is determined by your tenancy's service limits.
About Service Limits and Usage
When you sign up for Oracle Cloud Infrastructure, a set of service limits are configured for your tenancy.
The service limit is the quota or allowance set on a resource. For example, your tenancy is allowed a maximum number of compute instances per availability domain. These limits are generally established with your Oracle sales representative when you purchase Oracle Cloud Infrastructure.
Compartment Quotas
Compartment quotas are similar to service limits; the biggest difference is that service limits are set by Oracle, and compartment quotas are set by administrators, using policies that allow them to allocate resources with a high level of flexibility.
NEW QUESTION 49
An OCI Architect is working on a solution consisting of analysis of data from clinical trials of a pharmaceutical company. The data is being stored in OCI Autonomous Data Warehouse (ADW) having 8 CPU Cores and 70 TB of storage. The architect is planning to setup autoscaling to respond to dynamic changes in the workload.
Which of the following needs to be considered while configuring auto scaling? Choose two
- A. Auto scaling also scales IO throughput linearly along with CPU
- B. The database memory SGA and PGA will not get affected by the changes in the number of CPUs during auto scaling
- C. Enabling auto scaling does not change the concurrency and parallelism settings
- D. The maximum CPU cores that will be automatically allocated for this database is 16 CPUs
Answer: A,C
Explanation:
Auto scaling is enabled by default when you create an Autonomous Database instance or you can use Scale Up/Down on the Oracle Cloud Infrastructure console to enable or disable auto scaling.
With auto scaling enabled the database can use up to three times more CPU and IO resources than specified by the number of OCPUs currently shown in the Scale Up/Down dialog. When auto scaling is enabled, if your workload requires additional CPU and IO resources the database automatically uses the resources without any manual intervention required.
Enabling auto scaling does not change the concurrency and parallelism settings for the predefined services IO throughput depends on the number of CPUs you provision and scales linearly with the number of CPUs.
NEW QUESTION 50
A cloud consultant is working on implementation project on OCI. As part of the compliance requirements, the objects placed in object storage should be automatically archived first and then deleted. He is testing a Lifecycle Policy on Object Storage and created a policy as below:
[ { "name": "Archive_doc", "action": "ARCHIVE", "objectNameFilter": { "inclusionPrefixes": "doc"] },
"timeAmount": 5, "timeunit": "DAYS", "isEnabled": true },
{ "name": "Delete_doc", "action": "DELETE", "objectNameFilter": "inclusionPrefixes": [ "doc"]
1."timeAmount": 5, "timeunit": "DAYS", "isEnabled": true }
What will happen after this policy is applied?
- A. All objects with names starting with "doc" will be deleted after 5 days of object creation
- B. All the objects having file extension ".doc" will be archived for 5 days and will be deleted 10 days after object creation
- C. All the objects having file extension ".doc" will be archived 5 days after object creation
- D. All the objects with names starting with "doc" will be archived 5 days after object creation and will be deleted 5 days after archival
Answer: A
Explanation:
Explanation
Object Lifecycle Management works by defining rules that instruct Object Storage to archive or delete objects on your behalf within a given bucket. A bucket's lifecycle rules are collectively known as an object lifecycle policy.
You can use a rule to either archive or delete objects and specify the number of days until the specified action is taken.
A rule that deletes an object always takes priority over a rule that would archive that same object.
NEW QUESTION 51
You have deployed a multi-tier application with multiple compute instances in Oracle Cloud Infrastructure.
You want to back up these volumes and have decided to use 'Volume Groups' feature. The Block volume and Compute instances exist in different compartments within your tenancy.
Periodically, a few child compartments are moved under different parent compartments, and you notice that sometimes volume group backup fails.
What could be the cause?
- A. You have the same block volume attached to multiple compute instances; if these compute instances are in different compartments then all concerned compartments must be moved at the same time.
- B. The Identity and Access Management policy allowing backup failed to move when the compartment was moved.
- C. A compute instance with multiple block volumes attached cannot move when a compartment is moved.
- D. You are exceeding your volume group backup quota configured.
Answer: B
NEW QUESTION 52
You have created compartment called Dev for developers. There are two 1AM groups for developers: group-devl and group-dev2. You need to write an Identity and Access Management (1AM) policy to give users in these groups access to manage all resources in the compartment Dev.
Which of the following 1AM policy will accomplish this?
- A. Allow any-user to manage all resources in compartment Dev where request.group= /group-dev*/
- B. Allow any-user to manage all resources in tenancy where target.comparment= Dev
- C. Allow group group-devl group-dev2 to manage all resources in compartment Dev
- D. Allow group /group-dev*/ to manage all resources in compartment Dev
Answer: C
NEW QUESTION 53
You are designing the network infrastructure for an application consisting of a web server (server-1) and a Domain Name Server (server-2) running in two different subnets inside the same Virtual Cloud Network (VCN) in Oracle Cloud Infrastructure (OCI). You have a requirement where your end users will access server-1 from the internet and server-2 from your customer's on-premises network. The on-premises network is connected to your VCN over a FastConnect virtual circuit.
How should you design your routing configuration to meet these requirements?
- A. Configure two routing tables: first one with a route to internet via an Internet gateway; associate this route table to the subnet containing server-1 .Configure the second route table to propagate specific routes to the on-premises network via a Dynamic Routing Gateway; associate this route table to subnet containing server-2.
- B. Configure a single routing table with two set of rules: one that has route to internet via an Internet Gateway and another that propagates specific routes for the on-premises network via a Dynamic Routing Gateway. Don't associate this routing table with any of the subnets in the VCN.
- C. Configure a single routing table with two set of rules: one that has route to internet via an Internet Gateway and another that propagate specific routes to the on-premises network via a Dynamic Routing Gateway. Associate the routing table with all the VCN subnets.
- D. Configure two routing tables that have rules to route all traffic via a Dynamic Routing Gateway. Associate the two routing tables with all the VCN subnets.
Answer: A
NEW QUESTION 54
Your organization is planning on using Oracle Cloud Infrastructure (OCI) File Storage Service (FSS). You will be deploying multiple compute instance in Oracle Cloud Infrastructure(OCI) and mounting the file system to these compute instances.
The file system will hold payment data processed by a Database instance and utilized by compute instances to create a overall inventory report. You need to restrict access to this data for specific compute instances and must be allowed/blocked per compute instance's CIDR block.
Which option can you use to secure access?
- A. Use 'Export option' feature of FSS to restrict access to the mounted file systems.
- B. Create a new VCN security list, choose SOURCE TYPE as Service and SOURCE SERVICE as FSS.
Add stateless ingress and egress rules for specific IP address and CIDR blocks. - C. Create and configure OCI Web Application Firewall service with built in DNS based intelligent routing.
- D. Use stateless Security List rule to restrict access from known IP addresses only.
Answer: A
NEW QUESTION 55
You are tasked with building a highly available, fault tolerant web application for your current employer. The security team is concerned about an increase in malicious web-based attacks across the internet and asked what you can do to add a higher level of security to the website.
How should you architect the solution on Oracle Cloud Infrastructure (OCI) to meet all requirements defined by your organization? (Choose the best answer.)
- A. Deploy at least 3 web application servers, each in a different fault domain, using a regional private subnet. Place a public load balancer in a regional public subnet and create a backend set for all of the web application servers. Deploy a Web Application Firewall (WAF) and configure the load balancer public IP address as the origin.
- B. Deploy at least 3 web application servers, each in a different fault domain, using a regional public subnet. Ensure that each web application server is assigned a public IP address. Deploy a Web Application Firewall (WAF) and configure one Origin for each public IP address.
- C. Deploy at least 3 web application servers, each in a different fault domain, using a regional public subnet. Use the OCI Traffic Management service to create a load balancing policy that will resolve DNS evenly between all web servers.
- D. Deploy at least 3 web application servers, each in a different fault domain, using a regional private subnet. Place a public load balancer in a regional public subnet and create a backend set for all of the web application servers. Create a Geolocation steering policy in Traffic Management and add an answer pool that directs to the public IP address of the load balancer. Configure a global catch-all rule to use this answer pool.
Answer: A
NEW QUESTION 56
Which three options are available to migrate an Oracle database 12.x from an on-premises environment to Oracle Cloud Infrastructure (OCI)?
- A. Configure RMAN cross-platform transportable tablespace backup sets.
- B. Use Oracle Data Pump Export/Import to migrate the database.
- C. Setup OCI schema and data transfer tool with Bare Metal DB Systems as the target.
- D. Create a backup of your on-premises database In OCI DB Systems.
- E. Leverage OCI Storage Gateway asynchronous database migration option.
Answer: A,B,D
Explanation:
https://docs.cloud.oracle.com/en-us/iaas/Content/Database/Tasks/mig-onprembackup.htm
NEW QUESTION 57
A large London based eCommerce company is running Oracle DB System Virtual RAC database on Oracle Cloud Infrastructure (OCI) for their eCommerce application activity. They are launching a new product soon, which is expected to sell in large quantities all over the world.
The application architecture should have minimal cost, no data loss, no performance impacts during the database backup windows and should have minimal downtime.
- A. Turn off automatic backups from the eCommerce database, implement Oracle Active Data Guard with the standby database deployed on another availability domain, and take backups from the standby database.
- B. Launch a new VM RAC database in another availability domain, launch a compute instance, deploy Oracle GoldenGate on it and then configure it to replicate the data from the eCommerce Database over to the new RAC database using GoldenGate. Take backups from the new VM RAC database.
- C. Launch a new VM RAC database in another availability domain, launch a compute instance, deploy Oracle GoldenGate on it and then configure bi-directional replication from the eCommerce Database over to the new VM RAC database using GoldenGate. Take backups from the new VM RAC database.
- D. Turn off automated backups from the eCommerce database, implement Oracle Data Guard with the Standby database deployed on another availability domain, take backups from the standby database.
Answer: C
Explanation:
Active Data Guard or GoldenGate are used for disaster recovery when fast recovery times or additional levels of data protection are required. And offload queries and backup to standby system.
Oracle GoldenGate to support a disaster recovery site is to have a working bi-directional data flow, from the primary system to the live-standby system and vice versa.
DataGuard and Automatic Backup
You can enable the Automatic Backup feature on a database with the standby role in a Data Guard association. However, automatic backups for that database will not be created until it assumes the primary role.
NEW QUESTION 58
Your team is conducting a root analysis (RCA) following a recent, unplanned outage. One of the block volumes attached to your production WebLogic server was deleted and you have tasked with identifying the source of the action. You search the Audit logs and find several Delete actions that occurred in the previous 24 hours. Given the sample of this event.
Which item from the event log helps you identify the individual or service that initiated the DeleteVolume API call?
- A. requestAgent
- B. eventId
- C. requestOrigin
- D. principalld
- E. eventource
Answer: D
Explanation:
Explanation
The Oracle Cloud Infrastructure Audit service automatically records calls to all supported Oracle Cloud Infrastructure public application programming interface (API) endpoints as log events. Currently, all services support logging by Audit.
Every audit log event includes two main parts:
* Envelopes that act as a container for all event messages
* Payloads that contain data from the resource emitting the event message The identity object contains the following attributes.
data.identity.authType The type of authentication used.
data.identity.principalId The OCID of the principal.
data.identity.principalName The name of the user or service. This value is the friendly name associated with principalId .
NEW QUESTION 59
Which three scenarios are suitable for the Oracle Infrastructure (OCI) Autonomous transaction Processing Server less (ATP-S) deployment?
- A. A small startup is deploying a new application fen eCommerce and it requires database to store customers' transactions the team b of what the load will look like since it is a new application. (Correct)
- B. well established, online auction marketplace is running an application where there is database usage 24*7 but also has peaks of activity that the hard to predict when the peaks happen, the total activities may reach 3 times the normal activity level (Correct)
- C. A developer working on an Internal project needs to use a database during work hours but doesn't need It during nights or weekends. the project budget requires her to keep costs low. (Correct)
- D. A manufacturing company is running Oracle E-Business Suite application on premises. They are looking to move this application to OCI and they want to use a managed database offering for their database tier.
- E. A midsize company is considering migrating its legacy on premises MongoDB database to Oracle Cloud Infrastructure (OCI). The database has significantly higher workloads on weekends than weekdays
Answer: A,B,C
Explanation:
MongoDB is a cross-platform document-oriented database program. Classified as a NoSQL database program, MongoDB uses JSON-like documents with schema, so the best to be migrated to Oracle NoSQL Database.
https://blogs.oracle.com/nosql/migrate-mongodb-data-to-oracle-nosql-database Autonomous transaction Processing Serverless (ATP-S) isn't supported yet for EBS database
NEW QUESTION 60
An insurance company is storing critical financial data in the OCI block volume. This volume is currently encrypted using oracle managed keys. Due to regulatory compliance, the customer wants to encrypt the data using the keys that they can control and not the keys which are controlled by Oracle.
What of the following series of tasks are required to encrypt the block volume using customer managed keys?
- A. Create a master encryption key, create a data encryption key, decrypt the block volume using existing oracle managed keys, encrypt the block volume using the data encryption key
- B. Create a vault, import your master encryption key into the vault, generate data encryption key, assign data encryption key to the block volume
- C. Create a master encryption key, create a new version of the encryption key, decrypt the block volume using existing oracle managed keys and encrypt using new version of the encryption key
- D. Create a vault, create a master encryption key in the vault, assign this master encryption key to the block volume
Answer: D
Explanation:
Oracle Cloud Infrastructure Vault lets you centrally manage the encryption keys that protect your data and the secret credentials that you use to securely access resources. You can use the Vault service to create and manage the following resources:
Vaults
Keys
Secrets
Vaults securely store master encryption keys and secrets that you might otherwise store in configuration files or in code.
The Vault service lets you create vaults in your tenancy as containers for encryption keys and secrets. If needed, a virtual private vault provides you with a dedicated partition in a hardware security module (HSM), offering a level of storage isolation for encryption keys that's effectively equivalent to a virtual independent HSM.
NEW QUESTION 61
You have provisioned a new VM.DenseIO2.24 compute instance with local NVMe drives. The compute instance is running production application. This is a write heavy application, with a significant Impact to the business it the application goes down.
What should you do to help maintain write performance and protect against NVMe devices failure.
- A. Configure RAID 1 for NVMe devices.
- B. NVMe drive have built in capability to recover themself so no other actions are required
- C. Configure RAID 10 for NVMe devices.
VM.DeselO2.24 compute instance include locally attached NVMe devices. These devices provide extremely low latency, high performance block storage that is ideal for big data, OLTP, and any other workload that can benefit from high-performance block storage.
A protected RAID array is the most recommended way to protect against an NVMe device failure. There are three RAID levels that can be used for the majority of workloads:
RAID 1: An exact copy (or mirror) of a set of data on two or more disks; a classic RAID 1 mirrored pair contains two disks RAID 10: Stripes data across multiple mirrored pairs. As long as one disk in each mirrored pair is functional, data can be retrieved RAID 6: Block-level striping with two parity blocks distributed across all member disks If you need the best possible performance and can sacrifice some of your available space, then RAID 10 array is an option. - D. Configure RAID 6 for NVMe devices.
Answer: C
NEW QUESTION 62
You notice that a majority of your Oracle Cloud Infrastructure (OCI) resources like compute instances, block volumes, and load balancers are not tagged. You have received a mandate from your CIO to add a predefined set of tags to identify owners for respective OCI resources. E.g. if Chris and Larry each create compute instances in a compartment, the instances that Chris creates include tags that contain his name as the value, while the instances that Larry creates have his name.
Which option is the simplest way to implement this new tagging requirement?
- A. Create an OCI Identity and Access Management policy to automatically tag a resource with the user name.
- B. Create an OCI Identity and Access Management policy requiring users to tag resources with their user name.
- C. Create tag variables to automatically tag a resource with the user name.
- D. Create a default tag for each compartment, which ensure that appropriate tags are applied at the time of resource creation.
Answer: A
NEW QUESTION 63
A customer is in a process of shifting their web based Sales application from their own data center located in US West to OCI India West (Mumbai) region. They want to do it in a controlled manner and initially only 1% of the traffic will be steered to the servers in OCI. After verification of everything is working as expected, the company is gradually planning to increase the ratio until they are comfortable with fully migrating all traffic to OCI.
Which of the following solution can be used in this situation?
- A. OCI DNS and Traffic Management with Failover Steering policy
- B. OCI DNS and Traffic Management with Geolocation Steering policy
- C. OCI DNS and Traffic Management with Load Balancer Steering policy
- D. OCI DNS and OCI Load Balancer Service
Answer: B
Explanation:
STEERING POLICIES is A framework to define the traffic management behavior for your zones. Steering policies contain rules that help to intelligently serve DNS answers.
FAILOVER
Failover policies allow you to prioritize the order in which you want answers served in a policy (for example, Primary and Secondary). Oracle Cloud Infrastructure Health Checks are leveraged to determine the health of answers in the policy. If the Primary Answer is determined to be unhealthy, DNS traffic will automatically be steered to the Secondary Answer.
LOAD_BALANCE
Load Balancer policies allow distribution of traffic across multiple endpoints. Endpoints can be assigned equal weights to distribute traffic evenly across the endpoints or custom weights may be assigned for ratio load balancing. Oracle Cloud Infrastructure Health Checks are leveraged to determine the health of the endpoint. DNS traffic will be automatically distributed to the other endpoints, if an endpoint is determined to be unhealthy.
ROUTE_BY_GEO
Geolocation-based steering policies distribute DNS traffic to different endpoints based on the location of the end user. Customers can define geographic regions composed of originating continent, countries or states/provinces (North America) and define a separate endpoint or set of endpoints for each region.
ROUTE_BY_ASN
ASN-based steering policies enable you to steer DNS traffic based on Autonomous System Numbers (ASN).
DNS queries originating from a specific ASN or set of ASNs can be steered to a specified endpoint.
ROUTE_BY_IP
IP Prefix-based steering policies enable customers to steer DNS traffic based on the IP Prefix of the originating query.
NEW QUESTION 64
......
Exam Questions and Answers for 1Z0-997-20 Study Guide Questions and Answers!: https://www.pass4guide.com/1Z0-997-20-exam-guide-torrent.html