Reliable Microsoft 365 Certified MS-721 Dumps PDF Dec 28, 2024 Recently Updated Questions
Pass Your Microsoft MS-721 Exam with Correct 228 Questions and Answers
Microsoft MS-721 Exam is a beta certification test, which means that it is still in development and is subject to change. MS-721 exam is currently being evaluated by a group of industry experts and is expected to be fully released in the near future. Collaboration Communications Systems Engineer certification is an opportunity for professionals to demonstrate their expertise in the field of communication and collaboration systems, and to gain recognition for their skills and knowledge.
NEW QUESTION # 59
You have a PBX phone system that contains 100 handsets. The handsets support SIP registration.
You implement a new Microsoft Teams Phone deployment that has SIP Gateway configured.
You need to register the handsets with Teams.
What should you do?
- A. From the Microsoft Teams admin center, create a configuration profile for each device. Configure the handsets to use LLDP.
- B. From the voice calling policy, set SIP devices can be used for calls to On. Configure the handsets to use LLDP.
- C. From the Microsoft Teams admin center, create a configuration profile for each device. Add the Teams SIP device details to the handsets.
- D. From the voice calling policy, set SIP devices can be used for calls to On. Configure the provisioning URL on the handsets.
Answer: D
Explanation:
https://learn.microsoft.com/en-us/microsoftteams/sip-gateway-configure#set-the-sip-gateway- provisioning-server-url
NEW QUESTION # 60
You need to implement the planned changes for the +14165555555 reception area number. You create a new call queue.
Which three actions should you perform in sequence next? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
NEW QUESTION # 61 
You have a Microsoft Teams Phone deployment. The 613 7010 5XXX phone number range is allocated to the Session Border Controller (SBC). A user named User1 is configured as shown in the following exhibit.
User1 reports that when an external caller attempts to call the phone number of User1, the external caller receives an error message.
User1 can make outbound calls, but no caller ID appears.
Which two commands should you run to resolve the issues? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A.
- B.
- C.
- D.
- E.
Answer: C,D
NEW QUESTION # 62
You have a Microsoft Teams Phone deployment.
You are configuring emergency services for Direct Routing.
You need to notify a group of users when an emergency number is dialed.
What should you configure in the Microsoft Teams admin center?
- A. a voice routing policy
- B. an emergency calling policy
- C. an emergency call routing policy
- D. a calling policy
Answer: B
Explanation:
Reference:
https://docs.microsoft.com/en-us/microsoftteams/manage-emergency-calling-policies
NEW QUESTION # 63
You have a Microsoft Lync Server 2013 deployment.
Some users use Enterprise Voice.
You plan to migrate to Microsoft Teams.
You need to design a migration solution. The solution must minimize the impact on end users during the migration.
What should you include in the solution?
- A. Migrate all other users directly from Lync Server 2013 to Teams.
- B. Perform an in-place upgrade from Lync Server 2013 to Microsoft Skype for Business Server 2015, and then migrate all users to Teams.
- C. Migrate all users directly from Lync Server 2013 to Teams.
- D. Migrate the Enterprise Voice users from Lync Server 2013 to Microsoft Skype for Business Server 2019. and then migrate the Enterprise Voice users to Teams.
Answer: B
NEW QUESTION # 64
You have a Microsoft 365 ES subscription that includes Microsoft Teams
You have an app setup policy named SalesApps that installs the Avatars app for the users in your company's sales department. You discover that a sales department user named User1 has an avatai that does NOT meet company standards You need to remove the avatar of User 1 The solution must NOT affect any other sales department users. What should you do from the Microsoft Teams admin center?
- A. From Manage apps in Teams apps, set the Avatars app status to Blocked
- B. From Manage users in Users, modify the settings of User1.
- C. From Setup policies in Team apps, modify the SalesApps policy
- D. From Permission policies in Team apps, create an app permission policy that blocks the Avatars app and assign the policy to User1.
Answer: B
NEW QUESTION # 65
You have a Microsoft Teams Phone deployment. The 613 7010 5XXX phone number range is allocated to the Session Border Controller (SBQ. A user named User! is configured as shown in the following exhibit.
User1 reports that when an external caller attempts to call the phone number or User1, the external caller receives an error message.
User 1 can make outbound calls, but no caller to appears.
Which two commands should you run to resolve the issues? Each correct answer presents part or the solution.
NOTE: Each correct selection is worth one point.
- A.
- B.
- C.
- D.
- E.
Answer: C,D
Explanation:
Reference:
https://docs.microsoft.com/en-us/powershell/module/skype/set-csonlinevoiceuser?view=skype-ps
NEW QUESTION # 66
Your company has a Microsoft Teams Phone deployment that uses Direct Routing.
A user named User1 reports that she cannot make calls because the dial pad is missing in Teams.
You run the Get-CsOnlineUser cmdlet and receive the output shown in the exhibit. (Click the Exhibit tab.)
Which two actions should you perform to ensure that the dial pad appears in the Teams client?
Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Assign a Microsoft 365 Phone System license to User1.
- B. Run the Set-CsUser cmdlet and specify the -LineURI parameter
- C. Run the Set-CsPhoneNumberAssignment cmdlet and specify the -PhoneNumber parameter.
- D. Run the Grant-CsOnlineVoiceRoutingPolicy cmdlet.
Answer: C,D
Explanation:
As VSARAVAN pointed out, D is incorrect because they already have a Teams Phone Standard license (MCOEV).
https://learn.microsoft.com/en-us/entra/identity/users/licensing-service-plan-reference
NEW QUESTION # 67
You are evaluating Microsoft Teams meeting features for a user named User1.
User1 is a member of the groups shown in the following table.
You export the following meeting policy for User1.
You have group policy assignments for the meeting policies as shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 68
You are adding new sites to your company.
The reporting team needs location-based reports in Microsoft Power B1 that include the subnet information of the new sites.
You need to add the information to Microsoft Teams.
What should you do?
- A. From the Microsoft Teams admin center, define a network subnet.
- B. From the Microsoft Call Quality Dashboard, upload tenant data.
- C. From the Microsoft Teams admin center, define a network topology.
- D. From the Microsoft Teams admin center, add the subnets to the Network planner.
Answer: B
NEW QUESTION # 69
You need to meet the technical requirements for the returns department.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 70
Exhibit
Your company has a Microsoft Teams Phone deployment that uses Direct Routing.
A user named User1 reports that she cannot make calls because the dial pad n missing in Teams.
You run the Get-CsOnlineUser cmdlet and receive the output shown in the exhibit (Click the Exhibit tab.) Which three actions should you perform to ensure that the dial pad appears in the Teams client? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A. Assign a Microsoft Teams Phone Standard license to User1.
- B. Run theGrant-CsOnlineVoiceRogtinfPolicy cmdlet
- C. Run the set-CsUsre cmdlet and specify the -LineURI parameter.
- D. Run the set-csPhoneNumberAssignment cmdlet and specify the -PhonNumber parameter.
- E. Run the set-csuser cmdlet and set the -enterprisevoiceenabled parameter to $True.
Answer: B,D
NEW QUESTION # 71
You have a Microsoft Teams Phone deployment that contains common area phones located in a public lobby.
You need to enable Advanced calling features on all the common area phones.
What should you configure from the Microsoft Teams admin center?
- A. a customization policy
- B. a configuration profile
- C. a calling policy
- D. a policy package
Answer: B
NEW QUESTION # 72
Hotspot Question
You have a Teams Phone deployment that contains an office in Mumbai.
The Mumbai office has a new Session Border Controller (SBC) named SBC1 that uses Direct Routing.
Users must be able to use SBC1 only when they are at the Mumbai office.
How should you complete the commands? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 73
You have a Microsoft Teams deployment.
You plan to use a SkypeSettings.xml file to deploy Teams Rooms.
Which two actions can you perform in the file? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. Define the account sign-in credentials.
- B. Enable the default video camera.
- C. Allow remote control from personal devices.
- D. Automatically accept proximity-based meeting invitations.
Answer: C,D
Explanation:
Manage console settings with an XML configuration file
At startup, if a Microsoft Teams Rooms console finds an XML file named SkypeSettings.xml located at C:\Users\Skype\AppData\Local\Packages\Microsoft.SkypeRoomSystem_8wekyb3d8bbwe\LocalState, it applies the configuration settings indicated by the XML file then deletes the XML file.
XML elements include:
* <AllowRoomRemoteEnabled> Boolean
If true, room remote connections are allowed. Enabled by default.
* <AutoAcceptProximateMeetingInvitations> Boolean
If true, proximity based meetings are automatically accepted. Disabled by default.
Reference:
https://learn.microsoft.com/en-us/microsoftteams/rooms/xml-config-file
NEW QUESTION # 74
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are optimizing a network to better support voice and collaboration workloads in Microsoft Teams. When the users are at a specific corporate site, you need to prevent the users from adding video during calls.
Solution: You run New-csTeamsMeetingPolicy and set the-AllowIPvideo parameter to $False.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation:
Instead run New-CsTeamsNetworkRoamingPolicy and set the -AllowIPVideo parameter to
$False.
Note: The CsTeamsMeetingPolicy cmdlets enable administrators to control the type of meetings that users can create or the features that they can access while in a meeting.
The -AllowIPVideo parameter determines whether video is enabled in a user's meetings or calls.
Set this to TRUE to allow the user to share their video. Set this to
FALSE to prohibit the user from sharing their video
Reference:
https://docs.microsoft.com/en-us/powershell/module/skype/new-csteamsmeetingpolicy
NEW QUESTION # 75
You have a Microsoft Teams Phone deployment. The 613 7010 5XXX phone number range is allocated to the Session Border Controller (SBC). A user named User1 is configured as shown in the following exhibit.
User1 reports that when an external caller attempts to call the phone number of User1, the external caller receives an error message.
User1 can make outbound calls, but no caller ID appears.
Which two commands should you run to resolve the issues? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
- A.
- B.
- C.
- D.
- E.
Answer: A,B
NEW QUESTION # 76
Your company has a Microsoft Teams Phor>e deployment.
The company has a direct inward dial (DID) phone number range of +14035554300 to +14035554329.
Phone numbers +14035554310 to +14035554325 are assigned to Teams users, auto attendants, and call queues.
You need to ensure that when an unassigned number is dialed, the caller is forwarded to a call queue named Reception.
Which three actions should you perform? Each correct answer presents a part of the solution.
NOTE: Each correct selection is worth one point.
- A. From the Microsoft Teams admin center, select Phone numbers, select Numbers, and then select Add.
- B. From the Microsoft Teams admin center, select Phone numbers select Routing rules and then select Add a new rule
- C. Set Routing options to Voice application and assign the Reception call queue.
- D. Set Routing options to Person in organization and assign the Reception call queue.
- E. Add the DID range of +14035554300 to +14035554329 to the phone number range.
- F. Add the DID range of +14035554300 to +14035554309 to the phone number range.
Answer: B,C,F
NEW QUESTION # 77
Hotspot Question
You have a Microsoft Teams Phone deployment
You are implementing dynamic emergency calling.
You need to define a network topology for the implementation.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection a worth one point
Answer:
Explanation:
Explanation:
Box 1: New-CsTenantNetworkSite
Define network sites.
Use the New-CsTenantNetworkSite cmdlet to define network sites. Each network site must be associated with a network region.
New-CsTenantNetworkSite -NetworkSiteID <site ID> -NetworkRegionID <region ID> Box 2: New-CsTenantNetworkSubnet Define network subnets Use the New-CsTenantNetworkSubnet cmdlet to define network subnets and associate them to network sites. Each network subnet can only be associated with one site.
New-CsTenantNetworkSubnet -SubnetID <Subnet IP address> -MaskBits <Subnet bitmas Box 3: -SubnetID Reference:
https://docs.microsoft.com/en-us/microsoftteams/manage-your-network-topology
NEW QUESTION # 78
You have a Microsoft Teams Phone deployment
You are implementing dynamic emergency calling.
You need to define a network topology for the implementation.
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection a worth one point
Answer:
Explanation:
NEW QUESTION # 79
You have a Microsoft Teams Phone deployment.
You have a cloud-only user named [email protected].
You need to enable a Direct Routing phone number for [email protected].
How should you complete the PowerShell script? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 80
......
Latest 2024 Realistic Verified MS-721 Dumps: https://www.pass4guide.com/MS-721-exam-guide-torrent.html
Pass MS-721 Exam Updated 228 Questions: https://drive.google.com/open?id=1eGK8_IrXOI83VMhT_jlG6K-WdpUAMbfU